![background image](http://html.mh-extra.com/html/sony/mhc-v90dw/mhc-v90dw_operating-instructions-manual_1330135068.webp)
68
GB
MHC-V90DW.GB.4-694-841-
35
(1)
•
•
“AutoSTBY” flashes on the display about
2 minutes before entering standby
mode.
•
•
The automatic standby function does
not work in the following cases:
— during tuner function.
— when the Sleep Timer is activated.
— when microphone or Guitar is
connected.
Setting the
BLUETOOTH/Network
standby mode
The BLUETOOTH/Network standby
mode enables the system to
turn on automatically when you
establish a BLUETOOTH connection,
a Wi-Fi connection, or a wired LAN
connection.
1
Press OPTIONS.
2
Press / repeatedly to select
“NW STBY”, then press
.
3
Press / repeatedly to select
the setting, then press
.
•
•
“ON”: The system turns on
automatically even when the
system is in standby mode.
•
•
“OFF”: Turns off this function.
To exit the options menu, press
OPTIONS.
Note
•
•
For the models sold in Europe,
to comply with the power saving
regulation in Europe, products with
the serial number S015503001 or later
cannot use this function when the
product is connected to the wired
network or not connected to the
wireless network. This function will
not be available when the network
connection is disconnected as well.
•
•
When the multi-room function turns on,
it supports TDLS (Tunneled Direct Link
Setup) and works as a wireless router
that improves the data communication
quality.
Turning on or off the
BLUETOOTH/Wi-Fi
signal
You can connect to the system from
a linked network device or a paired
BLUETOOTH device in all functions
when the system’s BLUETOOTH/
Wi-Fi signal is set to on. The
BLUETOOTH/Wi-Fi signal is turned
on by default.
1
Press OPTIONS.
2
Press / repeatedly to select
“RF”, then press
.
3
Press / repeatedly to select
the setting you want, then press
.
•
•
“RF ON”: Wi-Fi signal is on/
BLUETOOTH signal is on
•
•
“WIFI OFF”: Wi-Fi signal is off/
BLUETOOTH signal is on
•
•
“RF OFF”: Wi-Fi signal is off/
BLUETOOTH signal is off
To exit the options menu, press
OPTIONS.