![background image](http://html.mh-extra.com/html/sony/mhc-v7d/mhc-v7d_operating-instructions-manual_1330127051.webp)
51
GB
Ad
ditional Inf
o
rma
tion
The BLUETOOTH device cannot
detect the unit, or “BT OFF” appears
in the display panel.
Set the BLUETOOTH signal to “BT ON”
(page 37).
Connection is not possible.
The BLUETOOTH device you
attempted to connect does not
support the A2DP profile, and cannot
be connected with the system.
Enable the BLUETOOTH function of
the BLUETOOTH device.
Establish a connection from the
BLUETOOTH device.
The pairing registration information
has been erased. Perform the pairing
operation again.
Erase the pairing registration
information of the BLUETOOTH
device (page 35) and perform the
pairing operation again (page 33).
The sound skips or fluctuates, or the
connection is lost.
The system and the BLUETOOTH
device are too far apart.
If there are obstacles between the
system and your BLUETOOTH device,
remove or avoid the obstacles.
If there is equipment that generates
electromagnetic radiation, such as a
wireless LAN, other BLUETOOTH
device, or a microwave oven nearby,
move them away.
The sound of your BLUETOOTH device
cannot be heard on this system.
Increase the volume on your
BLUETOOTH device first, then adjust
the volume using
+/–.
There is severe hum, noise, or
distorted sound.
If there are obstacles between the
system and your BLUETOOTH device,
remove or avoid the obstacles.
If there is equipment that generates
electromagnetic radiation, such as a
wireless LAN, other BLUETOOTH
device, or a microwave oven nearby,
move them away.
Turn down the volume of the
connected BLUETOOTH device.
The sound from “Voice Playback” in
“Fiestable” application does not
output.
The built-in sound demonstration is
activated, press
to stop the
demonstration. Then, perform the
playback again.
Party Chain
Party Chain function cannot be
activated.
Check the connections (page 40).
Make sure the audio cords are
connected correctly.
“PARTY CHAIN” is flashing in the
display panel.
You cannot select AUDIO IN 1
function if you make connection
(page 40) during Party Chain
function. Use the buttons on the unit
to select other function (page 41).
Press PARTY CHAIN on the unit.
Restart the system.
Party Chain function does not
operate properly.
Turn off the system. Then, turn on the
system to activate the Party Chain
function.
To reset the system
If the system still does not operate
properly, reset the system to factory
default settings.
Use the buttons on the unit to perform
this operation.
1
Unplug and plug the AC power cord
(mains lead) back in.
2
Press
to turn on the system.
3
Hold down ENTER and /
for about 3 seconds.
“RESET” appears in the display panel.
All user-configured settings, such as
preset radio stations, timer, and the
clock are reset to factory default
setting.
Summary of Contents for MHC-V7D
Page 61: ......
Page 62: ......
Page 63: ......
Page 64: ... 2015 Sony Corporation Printed in China 4 564 681 13 1 ...