MHC-V5.GB.4-531-350-
11
(1)
36
GB
Play Timer/Recording Timer
Make sure you have set the clock.
Play Timer:
You can wake up to disc, tuner or
USB device at a preset time.
Recording Timer:
You can transfer music from a preset
radio station to a USB device at a
specified time.
1
Prepare the sound source.
For Play Timer:
Prepare the sound source, then
press /– to adjust the
volume.
When selecting a disc or USB device
as a sound source, and you want to
start from a specific track or file,
create your own program
(page 18).
For Recording Timer:
Tune to the radio station
(page 23).
2
Press TIMER MENU.
3
Press
/
repeatedly to select
“PLAY SET” or “REC SET,” then
press .
4
Set the time to start playback or
transfer.
Press
/
repeatedly to set the
hour/minute, then press .
5
Use the same procedure as in
step 4 to set the time to stop
playback or transfer.
6
Press
/
repeatedly to select
the sound source you want,
then press .
For Recording Timer, connect a USB
device to the B port after selecting
the sound source.
7
Press
to turn off the system.
Note
If the system remains on, the timers will
not take effect.
To check the timer setting or
activate the timer again
1
Press TIMER MENU.
“TIMER SEL” flashes on the display.
2
Press .
3
Press
/
repeatedly to select
“PLAY SEL” or “REC SEL,” then
press .
To cancel the timer
Repeat the same procedure as
“To check the timer setting or
activate the timer again” and select
“TIMER OFF” in step 3, then press .
Notes
ˎ
The system turns on before the preset
time. If the system is already turned
on at the preset time or if “STANDBY”
flashes on the display, the Play Timer
and the Recording Timer will not be
activated.
ˎ
Do not operate the system from the
time the system turns on until the
playback or transfer starts.
