Sony MHC-V42D, Help Manual

Page: 64 / 167

Synchronization of settings in a Wireless Party Chain
When a Wireless Party Chain has been established, the following settings on the connected systems are changed:
The MEGA BASS settings on all connected system(s) are synchronized with the first system.
Karaoke setting (Vocal Fader, Key Control and Mic Echo) on all connected system(s) is turned off.
The Party Light settings on the Party Guests are synchronized with the Party Host.
DJ Effect on both the Party Host and Party Guests is turned off.
The Sound Field settings return to the defaults on all connected system(s).
When the volume on the first system is adjusted, the volume on all connected system(s) is synchronized with the
volume on the first system. However, even if the volume on other system(s) is adjusted, the volume on the first
system will not change.
When the first system is turned off, all the other connected systems also turn off.
Hint
You can also operate the Wireless Party Chain function on “Sony | Music Center.”
What you can do with the Wireless Party Chain function depends on the systems you connect.
When using the Wireless Party Chain function, the codec automatically switches to SBC.
[GUEST XX] appears on the display (XX is a number). [HOST] appears on the display of the first system.
Hint
Connect the second system within 1 minute. After 1 minute or more, the system setting is canceled.
To connect additional systems, repeat steps – 1 to 2.
Hint
When connecting a third or more systems, connect each one within 30 seconds of connecting the previous system.
After 30 seconds or more, the system cannot be connected.
If you want to add another system after connecting (30 seconds or more), press and hold W. PARTY CHAIN on the first
system, then operate steps
– 1 to 2.
3.
Wait 30 seconds after the last Party Guest is connected.
[P.CHAIN] stops flashing on the display of the Party Host and the BLUETOOTH device reconnects to the Party
Host.
3
Start playback.
Start playback on the connected BLUETOOTH device and adjust the volume.
The same music is played from all systems.
When adjusting the volume on the BLUETOOTH device or the system connected with the device (the system set
up as the first one), the volumes of all systems are automatically adjusted.
*
For other systems (the second or later
system set), you can also adjust the volume on each other.
4
Depending on the connected device, the volume may not be synchronized with the volume you adjusted on the first system.
*
64