background image

24

GB

Note

The system may enter standby mode 
automatically if the volume level of the 
connected equipment is too low. Adjust the 
volume level of the equipment. To turn off 
automatic standby function, see “Setting the 
automatic standby function” (page 24).

Deactivating the 
buttons on the unit

(Child Lock)

You can deactivate the buttons on the unit 
(except 

"/1

) to prevent misoperation, 

such as child mischief.

Hold down 

x

 on the unit for more 

than 5 seconds.

“CHILD LOCK ON” appears in the 
display panel.
You can only operate the system using the 
buttons on the remote control.
To cancel, hold down 

x

 on the unit for 

more than 5 seconds until “CHILD LOCK 
OFF” appears in the display panel.

Note

Child Lock function will be canceled when you 
disconnect the AC power cord.

Setting the automatic 
standby function

This system is equipped with an 
automatic standby function. With this 
function, the system enters standby mode 
automatically in about 15 minutes when 
there is no operation or audio signal 
output.
By default, the automatic standby 
function is turned on.
Use the buttons on the unit to perform this 
operation.

1

Press OPTIONS.

2

Press 

V/v

 

repeatedly to select 

“AutoSTBY”, then press ENTER.

3

Press 

V/v

 

repeatedly to select 

“ON” or “OFF”, then press 
ENTER.

To exit the options menu, press 
OPTIONS.

Notes

• The message “AutoSTBY” flashes in the 

display about 2 minutes before entering 
standby mode.

• The automatic standby function does not work 

during tuner function.

• The system may not enter standby mode 

automatically in the following cases:
– when an audio signal is detected.
– during playback of audio files.
– while the preset Play Timer or Sleep Timer 

is in process.

Summary of Contents for MHC-V3





































Reviews: