44
US
MHC-V21.US.4-736-607-
12
(1)
2
Connect an optional equipment
(page 15).
3
Press FUNCTION repeatedly to
select “AUDIO IN”.
4
Start playing the connected
equipment.
5
Press VOL + repeatedly to adjust
the volume.
Note
The system may enter standby mode
automatically if the volume level of the
connected equipment is too low. Adjust
the volume level of the equipment.
To turn off automatic standby function,
see “Setting the automatic standby
function” (page 44).
Deactivating the
buttons on the unit
(Child Lock)
You can deactivate the buttons
on the unit (except
) to prevent
misoperation, such as child mischief.
Hold down
on the unit for more
than 5 seconds.
“CHILD LOCK ON” appears on the
display.
You can only operate the system using
the buttons on the remote control.
To turn off the Child Lock function,
hold down
on the unit for more
than 5 seconds until “CHILD LOCK OFF”
appears on the display.
Note
•
•
Child Lock function will be turned off
automatically when you disconnect the
AC power cord (mains lead).
•
•
Child Lock function cannot be activated
when you open the disc tray.
Setting the automatic
standby function
The system enters standby mode
automatically in about 15 minutes
when there is no operation or audio
signal output.
By default, the automatic standby
function is turned on.
1
Press OPTIONS.
2
Press / repeatedly to select
“AutoSTBY”, then press
.
3
Press / repeatedly to select
“ON” or “OFF”, then press
.
To exit the options menu, press
OPTIONS.
Note
•
•
“AutoSTBY” flashes on the display about
2 minutes before entering standby
mode.
•
•
The automatic standby function does
not work in the following cases:
— during tuner function.
— when the Sleep Timer is activated.
— when microphone or guitar is
connected.
— when the system is a Party Guest in
the Wireless Party Chain function or
the Guest system in the Speaker Add
function.
