background image

MHC-V21/V21D

6

Note

•  JIG
 

When  disassembling  the  set,  use  the  following  jig  (for  front 
panel removal).

 

Part No.: J-2501-238-A JIG FOR SPEAKER REMOVAL

NOTE  OF  REPLACEMENT  OF  THE  MS-476  BOARD

When  the  MS-476  board  is  defective,  exchange  the  entire 
LOADING COMPLETE ASSY (T).

TEST  DISCS

Use following TEST DISC when this unit confi rms the operation
and checks it.

• 

For CD

Part No.   

Description

3-702-101-01 

DISC (YEDS-18), TEST

4-225-203-01 

DISC (PATD-012), TEST

J-2501-307-A 

DISC (HLX-A1), TEST

• 

For DVD SL (Single Layer)

Part No.   

Description

J-6090-069-A 

DISC (HLX-503), TEST (NTSC)

J-6090-088-A 

DISC (HLX-504), TEST (NTSC)

J-2501-305-A 

DISC (HLX-513), TEST (NTSC)

J-6090-077-A 

DISC (HLX-506), TEST (PAL)

• 

For DVD DL (Double Layer)

Part No.   

Description

J-6090-071-A 

DISC (HLX-501), TEST (NTSC)

J-6090-089-A 

DISC (HLX-505), TEST (NTSC)

J-2501-306-A 

DISC (HLX-514), TEST (NTSC)

J-6090-078-A 

DISC (HLX-507), TEST (PAL)

RELEASING  THE  DISC  TRAY  LOCK

The disc tray lock function for the antitheft of an demonstration 
disc in the store is equipped.
It can release the lock function in the following procedure.

Releasing Procedure:

1.  Press [

1

] button to turn the power on.

2.  Press  [FUNCTION]  button  until  the  message  “DVD/CD”  is 

displayed.

3.  Press  [

 TUNING  - 

.

]

 

and  [

B

]  buttons  simultaneously 

and hold down for around 3 seconds.

4.  The message “UNLOCKED” is displayed and the disc tray is 

unlocked.

Note:

 When 

LOCKED

 is displayed, the disc tray lock is not released by 

turning power on/off  with the

 [

1

]

 button.

If “PROTECTX” (X is a number)
and “CHECK MANUAL” fl ashes
on the display

Immediately unplug the AC
power cord (mains lead), and
check if anything is blocking the
ventilation openings of the unit.
After you have checked and
found no problems, reconnect
the AC power cord (mains lead),
and turn on the system. If the
issue persists, contact your
nearest Sony dealer.

Protect Type Description:

X (Error Code)

Description

2

Defect  of  thermistor  IC  or  charging  circuit 

used  by  SPM  (Sound  Pressure  Management) 

system.

3

There  is  possibility  of  over  current  happen  at 

speaker output.

or

Unusual  heat  up  of AMP  IC  by  improper  as-

sembly of heat sink.

4

DC appears in SP terminal by defect of AMP 

IC.

Ver. 1.1

SYS SET

2018/08/28 21:56:45 (GMT+09:00)

Summary of Contents for MHC-V21































































Reviews: