background image

40

There is severe hum or noise.

•A TV or VCR is placed too close to the

stereo system.  Move the stereo system
away from the TV or VCR.

The sound from the connected source is
distorted.

•If “VIDEO” appears in the display when

you press FUNCTION, switch the display
to “MD” (see “Notes: Connecting a
VCR”).

The timer does not function.

•Set the clock correctly.

DAILY1, DAILY 2, and REC do not appear
when you press the TIMER SELECT button.

•Set the timer correctly.
•Set the clock.

The remote does not function.

•There is an obstacle between the remote

and the system.

•The remote is not pointing in the

direction of the system’s sensor.

•The batteries have run down.  Replace the

batteries.

There is acoustic feedback.

•Decrease the volume level.
•Move the microphone away form the

speakers or change the direction of the
microphone.

The color irregularity on a TV screen
persists.

•Place the speakers farther away from the

TV set.

Troubleshooting (continued)

Speakers

Sound comes from one channel or
unbalanced left and right volume.

•Check the speaker connection and

speaker placement.

There is no sound from the surround
speakers (MHC-RX80 only).

•Press SURROUND to turn on the

surround effect.

CD Player

The CD tray does not close.

•The CD is not placed properly.

The CD will not play.

•The CD is not lying flat in the disc tray.
•The CD is dirty.
•The CD is inserted label side down.
•Moisture condensation has built up.

Remove the CD and leave the system
turned on for about an hour until the
moisture evaporates.

Play does not start from the first track.

•The player is in programme or shuffle

mode.  Press PLAY MODE repeatedly
until “PROGRAM” or “SHUFFLE”
disappear.

“OVER” is displayed.

•You have reached the end of the CD.

Press and hold 

0

 to return.

Summary of Contents for MHC-RX70



















































Reviews: