![background image](http://html.mh-extra.com/html/sony/mhc-rv777d/mhc-rv777d_operating-instructions-manual_1330088036.webp)
36
GB
3
Press
M
or
m
repeatedly to select
“LEVEL”, “BALANCE” or “LFE”, then
press ENTER.
4
Press
M
or
m
repeatedly to adjust the
level or balance or select a setting,
then press ENTER.
To return to the default settings
Select the item to be returned to the default
setting and press CLEAR.
To change the volume of all
speakers at one time
Adjust using or –.
x
LEVEL
You can vary the level of each speaker as
follows. For MHC-RV999D/RV888D, be sure
to set “TEST TONE” to “ON” for easy
adjustment.
Any items that are set to “NONE” in the “SIZE”
setting cannot be selected.
The default settings are underlined.
* Except for MHC-RV777D
x
BALANCE
You can vary the balance of the left and right
speakers as follows. For MHC-RV999D/
RV888D, be sure to set “TEST TONE” to “ON”
for easy adjustment.
The default setting is underlined.
x
TEST TONE (Except for MHC-RV777D)
The speakers will emit a test tone to adjust
“BALANCE” and “LEVEL”.
The default setting is underlined.
x
LFE (MHC-RV777D only)
You can enjoy low frequency effect with LFE
channel recorded on discs.
The default setting is underlined.
Note
If there is excessive wow or flutter when recording
audio from a DVD, set “LFE” to “OFF”.
CENTER*
0 dB
Adjust the level of the center
speaker (–6 dB to +6 dB, 1 dB
increments).
SURROUND
LEFT*
0 dB
SURROUND
RIGHT*
0 dB
Adjust the level of the surround
speaker (–6 dB to +6 dB, 1 dB
increments).
SUBWOOFER
0 dB (for MHC-
RV999D/RV888D)
LEVEL 3 (for
MHC-RV777D)
Adjust the level of the sub
woofer (–10 dB to +10 dB for
MHC-RV999D/RV888D,
LEVEL 3 – 1 for MHC-
RV777D).
FRONT
– – – (CENTER)
Adjust the balance between the
front left and right speakers
(6 steps left or right).
The center position is shown as
“– – –”.
OFF
The test tone is not emitted from
the speakers.
ON
The test tone is emitted from each
speaker in sequence while
adjusting balance or level. When
you select one of the “SPEAKER
SETUP (LEVEL or
BALANCE)” items, the test tone
is emitted from the selected
speaker.
ON
The LFE channel is output.
OFF
The LFE channel is not output.