Sony MHC-NX3AV Operating Instructions (primary manual) Operating Instructions Manual Download Page 5

Page: 5 / 52

–

Insert only the stripped portion.

Black/
Stripe (

’

)

Red/
Solid (

‘

)

Connect the flat cord to the SYSTEM
CONTROL connectors until it clicks.

Connect the front speakers.

Connect the speaker cords to the FRONT
SPEAKER jacks as below.

Note

Keep the speaker cords away from the
antennas to prevent noise.

Connect the rear speakers.

Connect the speaker cords to the REAR
SPEAKER jacks.

Notes

• Keep the speaker cords away from the

antennas to prevent noise.

• Be sure to connect both left and right

rear surround speakers. Otherwise,
the sound will not be heard.

Insert only the stripped portion.

Black/
Stripe (

’

)

Gray/
Solid (

‘

)

Insert only the stripped portion.

continued

To disconnect

Black/
Stripe (

’

)

Gray/
Solid (

‘

)

AM loop aerial

Extend the FM lead
aerial horizontally.

Connect the centre speaker.

Connect the speaker cords to the
CENTER SPEAKER jacks.

Note

Keep the speaker cords away from the
antennas to prevent noise.

Connect the FM/AM antennas.

Set up the AM loop antenna, then
connect it.

Jack type

FM 75

Ω

AM loop aerial

Extend the FM lead
aerial horizontally.

–

FM 75

Ω

COAXIAL

Note

Set up the AM loop antenna as far as possible from
the main unit.

Summary of Contents for MHC-NX3AV Operating Instructions (primary manual)





















































Search results

Summary of Contents for MHC-NX3AV Operating Instructions (primary manual)

Reviews:

Sony MHC-NX3AV Operating Instructions (primary manual), Operating Instructions Manual, Page: 5 / 52

Search results

Summary of Contents for MHC-NX3AV Operating Instructions (primary manual)

Reviews: