Sony MHC-M40D, Operating Instructions Manual

Page: 64 / 76

64
GB
MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977- 16 (1)
Control for HDMI (“BRAVIA”
Sync)
The system does not turn on even
when the TV is turned on.
•
•
Hold down SHIFT and press
SETUP, then set [HDMI SETUP]
– [CONTROL FOR HDMI] to [ON]
(page 35). The TV must support
the Control for HDMI function
(page 49). For details, refer to
the operating instructions of your
TV.
•
•
Check the speaker settings of the
TV. The system power syncs with
the speaker settings of the TV.
For details, refer to the operating
instructions of your TV.
•
•
If the sound was output from the
TV’s speakers the previous time,
the system does not turn on even
when the TV is turned on.
The system turns off when the TV
is turned off.
•
•
Check the setting of [HDMI SETUP]
– [STANDBY LINKED TO TV]
(page 36). When
[STANDBY LINKED TO TV] is set
to [ON], the system turns off
automatically when you turn off
the TV regardless of the input.
The system does not turn off even
when the TV is turned off.
•
•
Check the setting of [HDMI SETUP]
– [STANDBY LINKED TO TV] (page
36).
To turn the system off
automatically regardless of the
input when you turn off the TV, set
[STANDBY LINKED TO TV] to [ON].
The TV must support the Control
for HDMI function (page 49).
For details, refer to the operating
instructions of your TV.
No TV sound is output from the
system.
•
•
Check the type and connection of
the HDMI cable or audio cable that
is connected to the system and
the TV (page 22).
•
•
If your TV is compatible with
Audio Return Channel, make
sure the system is connected
to an ARC-compatible HDMI
IN jack of the TV (page 22).
If sound is still not output or if
sound is interrupted, connect
an audio cable (not supplied),
hold down SHIFT and press
SETUP, then set [HDMI SETUP] –
[AUDIO RETURN CHANNEL] to
[OFF] (page 36).
•
•
If your TV is not compatible with
Audio Return Channel, TV sound
will not be output from the system
even if the system is connected to
the TV’s HDMI IN jack. To output TV
sound from the system, connect
an audio cable (not supplied)
(page 23).
•
•
Change the function of the system
to “TV” (page 23).
•
•
Increase the volume on the
system.
•
•
Depending on the order in which
you connect the TV and the
system, the system may be muted
and “ ” (muting) lights up on the
display of the unit. If this happens,
turn on the TV first, then the
system.
•
•
Set the speakers setting of the TV
(BRAVIA) to Audio System. Refer to
the operating instructions of your
TV on how to set the TV.
The sound is output from both the
system and the TV.
• •
Mute the sound of the system or
the TV.