Sony MHC-GX9900 - Mini Hi Fi Component System Operating Instructions Manual Download

Page: 43 / 56

rou
b

lesh

oo
tin
g

masterpage:Right

\Documents and Settings\Administrator\Desktop\MHC-GNX100 GB\GB11TRB-

model name [MHC-GNX100/GNX90/GNX80/GNX88/GNX70/GNX77/GX9900/GNX60/GNX66]

[2-547-453-11(2)] GB

Should you encounter a problem with your
system, do the following:

Make sure the power cord and speaker
cords are connected correctly and firmly.

Find your problem in the troubleshooting
checklist below and take the indicated
corrective action.

If the problem persists after doing all of the
above, consult your nearest Sony dealer.

General

The display starts flashing as soon as you
plug in the power cord even though you have
not turned on the system.

• The demonstration mode started. Press

?/1

(see

step 7 of “Hooking up the system” on page 8).

The clock/timer setting is canceled.

• The power cord is disconnected or a power failure

occured. Redo “Setting the clock” (page 13). If
you have set the timer, redo “Waking up to music”
(page 33) and “Timer recording radio programs”
(page 35).

The radio presetting is canceled.

• The power cord is disconnected or a power failure

occured for longer than half a day. Redo
“Presetting radio stations” (page 19).

“– –:– –” appears in the display.

• A power failure occurred. Set the clock (page 13)

and timer settings (page 33 to 36) again.

There is no sound.

• Turn MASTER VOLUME clockwise (or press

on the remote).

• Make sure the headphones are not connected to

the PHONES jack.

• Check the speaker connections (page 9).

• There is no audio output during Timer Recording.

There is no microphone sound.

• Turn MASTER VOLUME (or press

/– on the remote repeatedly) or
MIC LEVEL to adjust the microphone volume.

• Make sure the microphone is connected to the

MIC 1 or MIC 2 jack correctly.

There is severe hum or noise.

• A TV or VCR is placed too close to the unit. Move

the unit away from the TV or VCR.

• Move the unit away from the source of noise.

• Connect the unit to a different wall outlet.

• Install a noise filter (commercially available) to

the power cord.

The timer cannot be set.

• Set the clock again (page 13).

The timer does not function.

• Check the timer setting and set the correct time

(pages 33 to 36).

• Cancel the Sleep Timer function (page 33).

• You cannot select the Play Timer and Timer

Recording simultaneously.

Troubleshooting

Problems and remedies

When the

?/1

indicator flashes

Immediately unplug the power cord and
check the following items.

• (MHC-GNX100/GNX88/GNX80 only)

Is the system control cable connected
correctly?

• If your unit have voltage selector, is the

voltage selector set to the correct voltage?
Check the voltage for your region, then
make sure the voltage selector is set
correctly.

• Are you using the supplied speakers?

• Is anything blocking the ventilation holes

on the rear of the unit?

After checking the above items and fixing
any problem, plug in the power cord again
and turn on the system. If the

?/1

indicator

still flashing, or if the cause of the problem
cannot be found even after checking all the
above items, consult your nearest Sony
dealer.

continued

Summary of Contents for MHC-GX9900 - Mini Hi Fi Component System

























































Search results

Summary of Contents for MHC-GX9900 - Mini Hi Fi Component System

Reviews:

Related manuals for MHC-GX9900 - Mini Hi Fi Component System

Brands by name

Popular brands

Sony MHC-GX9900 - Mini Hi Fi Component System, Operating Instructions Manual

Search results

Summary of Contents for MHC-GX9900 - Mini Hi Fi Component System

Reviews:

Related manuals for MHC-GX9900 - Mini Hi Fi Component System

Brands by name

Popular brands