![background image](http://html.mh-extra.com/html/sony/mhc-gt3d/mhc-gt3d_operating-instructions-manual_1330034022.webp)
22
GB
filename[D:\NORM'S JOB\SONY HA\SO150006\MHC-GT3D (PMRF
03)\4562957132_GB (CEK)\050CON.fm]
masterpage:Left
model name [MHC-GT3D]
[4-562-957-
13
(2)] GB
You can also connect external equipment (DVD players, etc.) to the OPTICAL IN jack.
When connecting such equipment, connect the OPTICAL IN jack and the Digital Out
(Optical) jack of the equipment in the same manner as shown above. For details, refer
to the operating instructions of your equipment.
If the audio output level from the system is low when connecting the external
equipment, try adjusting the audio output settings on the connected equipment. It may
improve the audio output level. For details, refer to the operating instructions of your
equipment.
Notes
If “CODE 01” and “SGNL ERR” appear on the display of the
subwoofer
When the audio input signals to the system are other than 2-channel Linear
PCM signals, the message “CODE 01” and “SGNL ERR” (indicates that the input
audio signals are unsupported) appear on the display of the subwoofer.
In this case, select the proper audio output mode on the TV or external
equipment in order to output 2-channel Linear PCM audio signals.
When no TV sound is heard from the system
If the message “CODE 01” and “SGNL ERR” appear on the display and no TV
sound is heard from the subwoofer and the speaker system, check the
following items and take the corrective actions on the TV.
Check that the speaker output setting is set to use external speakers.
Example: KDL-42W800B
1
Press the HOME button on the TV remote control, and then select the
setting item.
2
Select the sound setting item, and then select the speaker setting item.
3
Select the external speaker output mode.
Check the audio output setting, and if automatic mode is selected, change it
to PCM output mode. This system supports 2-channel Linear PCM formats
only.
Example: KDL-42W800B
1
Press the HOME button on the TV remote control, and then select the
setting item.
2
Select the sound setting item, and then select the digital audio output
setting item.
3
Select the PCM output mode.
The information provided above is based on a Sony TV. In case of another TV or
external equipment, check the setting of similar items. For details, refer to the
operating instructions of your TV or external equipment.
Note