Basic Operations
11
Tips
• Pressing
·∏
when the power is off
automatically turns the power on and starts CD
playback if there is a CD in the tray (One Touch
Play).
• You can switch from another source to the CD
player and start playing a CD just by pressing
·∏
or the DISC 1~3 buttons (Automatic Source
Selection).
• If there is no CD in the player, “
CD NO DISC
”
appears in the display.
• When a disc tray is selected or the CD placed on
that tray is playing, the DISC 1~3 button for the
respective tray lights green.
To
Do this
Stop play
Press
π
(
p
on the remote).
Pause
Press
·∏
(
P
on the remote).
Press again to resume play.
Select a track
During play or pause, turn the
jog dial clockwise (to go
forward) or counterclockwise
(to go back) and release it
when you reach the desired
track. Or press
+
(to go
forward) or
=
(to go back)
on the remote.
Find a point in
Press and hold down
)
or
a track
0
(or
)/0
on the
remote) during play and
release it at the desired point.
Select a CD
Press a DISC 1~3 button or
in stop mode
DISC SKIP EX-CHANGE.
Play only the
Press 1/ALL DISCS
CD you have
repeatedly until “1 DISC”
selected
appears.
Play all CDs
Press 1/ALL DISCS repeatedly
until “ALL DISCS” appears.
Remove the CD Press
§
OPEN/CLOSE.
Exchange other
Press DISC SKIP
CDs while
EX-CHANGE.
playing
Adjust the
Turn VOLUME (or press VOL
volume
+/– on the remote).
