![background image](http://html.mh-extra.com/html/sony/mhc-ec59/mhc-ec59_operating-instructions-manual_1329950018.webp)
MHC-EC59.GB.4-188-893-11(1)
1
GB
5
Press
/
repeatedly to select
“ERASE,” and then press ENTER.
“TRACK ERASE” or “FOLDER
ERASE” appears in the display.
To cancel the erase operation, press
.
6
Press ENTER.
The selected audio file or folder is
erased.
Folder and file generation rules
When first transferring music to a USB
device, a “MUSIC” folder is created
below the “ROOT” folder and a transfer
mode-oriented folder (“CD-DA,”
“CD-MP3,” “REC1” or “PROGRAM”) is
created within the “MUSIC” folder.
Folders and files are generated within any
of the transfer mode-oriented folders as
follows.
CD SYNC
1)
Music
source
Folder name
File name
MP3
Same as the music source
2)
CD-DA
“CDDA001”
3)
“TRACK001”
4)
REC1
Music
source
Folder name
File name
MP3
“REC1”
5)
Same as the
music source
2)
CD-DA
“TRACK001”
4)
1)
In Program Play mode, the folder name is
“PGM_xxx,” and the file name depends on
the music source (CD-DA disc or MP3 disc).
2)
Up to 32 characters of the name are assigned.
3)
Folder numbers are assigned serially
thereafter up to the maximum 999.
4)
File numbers are assigned serially thereafter.
5)
A new file is created in the “REC1” folder
each time REC1 is performed.
Notes
When transferring music from a CD, the
tracks are transferred as 128 kbps MP3 files.
When transferring music from an MP3 disc,
MP3 files are transferred with the same bit
rate as the original MP3 files.
If you start transferring in shuffle play
mode, repeat play mode or in program play
mode (when no tracks or MP3 files are
programmed), the selected play mode is
automatically cancelled and the play mode
switches to normal play mode.
While transferring music from an MP3 disc,
no sound is output and “HI-SPEED” appears.
CD text information is not transferred in the
created MP3 files.
If you cancel the transfer partway, an MP3
file is created up to the point when the
transfer was stopped.
Transferring stops automatically if:
the USB device runs out of space during
the transfer process.
the number of audio files on the USB
device reaches the limit for the number
that the system can recognize.
If the folder to be erased contains non-MP3/
WMA/AAC format files or sub folders, these
are not erased.
If a folder or file that you are trying to
transfer already exists on the USB device
with the same name, a sequential number is
added after the name without overwriting the
original folder or file.
Do not remove the USB device during
transfer or erase operations. Doing so may
corrupt the data on the USB device or
damage the USB device itself.