45
AUDIO POWER SPECIFICATIONS:
(MHC-BX3 U.S.A. model only)
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
with 6 ohm loads both channels driven, from
120-10,000 Hz; rates 75 watts per channel
minimum RMS power, with no more than
10% total harmonic distortion from 250
milliwatts to rated output.
Amplifier section
Canadian model:
MHC-BX3:
Continuous RMS power output (reference)
60 + 60 watts
(6 ohms at 1 kHz,
10% THD)
Total harmonic distortion less than 0.07%
(6 ohms at 1 kHz, 35 W)
European model:
MHC-BX3:
DIN power output (rated) 45 + 45 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
60 + 60 watts
(6 ohms at 1 kHz,
10% THD)
Music power output (reference)
150 + 150 watts
(6 ohms at 1 kHz,
10% THD)
Other model:
MHC-DX3:
The following measured at AC 120, 220, 240 V
50/60 Hz
DIN power output (rated) 75 + 75 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
100 + 100 watts
(6 ohms at 1 kHz,
10% THD)
Specifications
continued
Inputs
MD/VIDEO IN:
voltage 450/250 mV,
(phono jacks)
impedance 47 kilohms
MIC:
sensitivity 1 mV,
(mini jack)
impedance 10 kilohms
Outputs
PHONES:
accepts headphones of
(stereo mini jack)
8 ohms or more
SPEAKER:
MHC-BX3:
accepts impedance of 6 to
16 ohms
MHC-DX3:
accepts impedance of 6 to
16 ohms
CD player section
System
Compact disc and digital
audio system
Laser
Semiconductor laser
(
λ
=780 nm)
Emission duration:
continuous
Laser output
Max. 44.6
µ
W*
*This output is the value
measured at a distance of
200 mm from the
objective lens surface on
the Optical Pick-up Block
with 7 mm aperture.
Wavelength
780 – 790 nm
Frequency response
2 Hz – 20 kHz (±0.5 dB)
Signal-to-noise ratio
More than 90 dB
Dynamic range
More than 90 dB
CD OPTICAL DIGITAL OUT
(Square optical connector jack, rear panel)
Wavelength
660 nm
Output Level
–18 dBm