Sony MHC-BX2, Operating Instructions Manual, Page: 22 / 44

22
To Press
Check the CHECK on the remote
program repeatedly. After the last
track, “CHECK END”
appears.
Clear a track from CLEAR on the remote in
the end stop mode.
Clear a specific CHECK on the remote
track repeatedly until the
number of the track to be
erased appears, then press
CLEAR.
Add a track to the 1 Select the disc tray with a
program DISC 1~3 button.
2 Select the track by
pressing . / > .
3 Press ENTER.
Clear the entire x once in stop mode or
program twice during playback.
Tips
• The program you made remains in the system’s
memory even after it has been played back. Press
CD, then press
hH to play the same program
again.
• If “--.--” appears instead of the total playing time
during programming, this means:
– you have programmed a track number
which exceeds 20.
– the total playing time has exceeded 100 minutes.
To cancel Program Play
Press PLAY MODE repeatedly until
“PROGRAM” or “SHUFFLE” disappears
from the display.
Programming the CD tracks
(continued)