![background image](http://html.mh-extra.com/html/sony/mex-xb120bt/mex-xb120bt_operating-instructions-manual_1329910035.webp)
35
GB
Pandora® operation
Pandora® connection is not possible.
Shut down the Pandora® application on
the mobile device, and then launch it
again.
Messages
The following messages may appear or flash
during operation.
INVALID
The selected operation could be invalid.
[USB MODE] cannot be changed during
iPod playback.
OUTPUT ERROR:
There may be an internal
malfunction.
Check the connection. If the error
message still remains on in the display,
consult your nearest Sony dealer.
READ:
Now reading information.
Wait until reading is complete and
playback starts automatically. This may
take some time depending on the file
organization.
TEMP CAUTION:
The thermal protector is
activated.
Reduce the volume.
(underscore):
The character cannot be
displayed.
For CD playback:
CD ERROR:
The disc cannot be played. The
disc will be ejected automatically.
Clean or insert the disc correctly, or make
sure the disc is not blank or defective.
CD NO DISC:
There is no disc.
Insert a disc containing playable files
(page 28).
CD NO MUSIC:
There is no playable file. The
disc will be ejected automatically.
Insert a disc containing playable files
(page 28).
CD PUSH EJT:
The disc could not be ejected
properly.
Press
(eject).
or
:
The beginning or the end
of the disc has been reached.
For USB device playback:
HUB NO SUPRT:
USB hubs are not
supported.
IPD STOP:
iPod playback has finished.
Operate your iPod/iPhone to start
playback.
NOT SUPPORT - ANDROID MODE
A USB device not supporting AOA
(Android Open Accessory) 2.0 is
connected to the unit while [USB MODE] is
set to [ANDROID].
– Set [USB MODE] to [MSC/MTP] (page 22).
USB ERROR:
The USB device cannot be
played.
Connect the USB device again.
USB NO DEV:
A USB device is not connected
or recognized.
Make sure the USB device or USB cable is
securely connected.
USB NO MUSIC:
There is no playable file.
Connect a USB device containing playable
files (page 29).
USB NO SUPRT:
The USB device is not
supported.
For details on the compatibility of your
USB device, visit the support site on the
back cover.
USB OVERLOAD:
The USB device is
overloaded.
Disconnect the USB device, then press SRC
to select another source.
The USB device has a fault, or an
unsupported device is connected.