33
By the visual setup menu
1
From the visual setup menu, select
(AUDIO SETUP)
c
“POSITION”
c
“CUSTOM,” then press
(ENTER)
.
For details on this procedure, see “Optimizing
sound for the listening position — Intelligent
Time Alignment” on page 31.
The speaker list appears.
2
Set the distance between your
listening position and each speaker.
To select the speaker, press
M
/
m
and
(ENTER)
.
To adjust the distance, press
M
/
m
, and to
confirm, press
(ENTER)
.
The distance is adjustable in 2 cm (
13
/
16
in)
steps, between 0 and 400 cm (0 and 13
1
/
10
ft).
To return to the previous display, press
.
To hide the visual setup menu, press
(VISUAL SETUP)
.
Tip
The setting in visual setup will switch the setting in
system setup automatically, and vice versa.
Customizing the equalizer curve
— EQ7 Tune
“CUSTOM” of EQ7 allows you to make your
own equalizer settings. You can adjust the level
of 7 different bands: 62 Hz, 157 Hz, 396 Hz,
1.0 kHz, 2.5 kHz, 6.3 kHz, and 16 kHz.
1
During reception/playback, press
(SYSTEM SETUP)
.
The system setup item appears on the main
unit.
2
Press
M
/
m
to select “EQ7 TUNE,” then
press
(ENTER)
.
3
Press
M
/
m
to select “CUSTOM,” then
press
(ENTER)
.
4
Adjust the level of each frequency.
To adjust the level, press
M
/
m
.
The level is adjustable in single steps,
between –8 and +8.
To switch the frequency, press
<
/
,
.
To restore the factory-set equalizer curve,
press and hold
(ENTER)
.
5
Press
(ENTER)
.
The setting is complete and the display
returns to normal play/reception mode.
To hide the system setup display, press
(SYSTEM SETUP)
.
Tip
Other equalizer types are also adjustable.
With the main unit
Press and hold the control dial instead of pressing
(SYSTEM SETUP)
, rotate the control dial instead of
pressing
M
/
m
, press
(SEEK)
–/+ instead of
<
/
,
,
press the control dial instead of
(ENTER)
.
Adjusting the speaker volume
You can adjust the volume of each connected
speaker.
1
Press
(SYSTEM SETUP)
while the unit is
off.
The system setup item appears on the main
unit.
2
Press
M
/
m
to select “SP SETUP,” then
press
(ENTER)
.
3
Press
(ENTER)
to select “LEVEL-ADJ.”
4
Adjust the volume of each speaker.
To adjust the level, press
M
/
m
.
The level is adjustable in single steps,
between –6 and +6.
To switch the speaker, press
<
/
,
.
The speaker switches as follows:
FL
(Front Left)
t
FR
(Front Right)
t
SR
(Rear Right)
t
SL
(Rear Left)
t
SUB
* (Subwoofer)
*
Appears only when “REAR/SUB” is set to “SUB
OUT” (page 39).
5
Press
,
repeatedly until the clock
display appears.
The setting is complete.
With the main unit
Press and hold the control dial instead of pressing
(SYSTEM SETUP)
, rotate the control dial instead of
pressing
M
/
m
, press
(SEEK)
–/+ instead of
<
/
,
,
press the control dial instead of
(ENTER)
.
FRONT LEFT
100cm
FRONT RIGHT
100cm
REAR LEFT
100cm
REAR RIGHT
100cm
SUBWOOFER
0cm
Summary of Contents for MEX-DV700
Page 3: ...3 ...
Page 54: ......
Page 55: ......
Page 56: ...Sony Corporation Printed in Thailand http www sony net ...
