46
Selecting an auxiliary device
1
Press
(SRC)
repeatedly until “AUX” appears
on the main unit.
2
Press
(MODE)
to select “FRONT-IN” or
“REAR-IN.”
Operate by the auxiliary device itself.
Adjusting the volume level
Be sure to adjust the volume of each connected
device before playback.
1
Turn down the volume on the unit.
2
Press
(SRC)
repeatedly until “AUX” appears
on the main unit.
If two auxiliary devices are connected, select
the device to adjust its volume by pressing
(MODE)
.
3
Start playback of the auxiliary device at a
moderate volume.
4
Set your usual listening volume on the unit.
5
Press
(SYSTEM SETUP)
.
6
Press
M
/
m
to select “AUX-LVL,” then press
(ENTER)
.
7
Press
M
/
m
to adjust the input level.
The input level is adjustable in single steps,
between –6 and +18.
8
Press
(ENTER)
.
The setting is complete.
With the main unit
Press
(SOURCE)
instead of
(SRC)
, rotate the volume
control dial instead of pressing
M
/
m
.
CD changer
Selecting the changer
1
Press
(SRC)
repeatedly until “CDC” appears.
2
Press
(MODE)
repeatedly until the desired
changer appears.
Playback starts.
With the main unit
Press
(SOURCE)
instead of
(SRC)
.
Skipping albums and discs
1
During playback, press
M
/
m
.
With the main unit
Use
(3)
/
(4)
(ALBUM –/+) instead of
M
/
m
.
To skip
Press
M
/
m
album
and release (hold for a
moment).
album
continuously
within 2 seconds of first
releasing.
discs
repeatedly.
discs
continuously
then, press again within 2
seconds and hold.
Z
X
Z
PL
M/m
ENTER
MODE
SRC
Disc number
Unit number
