![background image](http://html.mh-extra.com/html/sony/mex-bt2950/mex-bt2950_operating-instructions-manual_1329894021.webp)
21
•
If you activate voice dialing with a cellular phone
connected to this unit, this function may not always
work in some cases.
•
Noises such as the engine running may interfere
with sound recognition. In order to improve
recognition, operate under conditions where noise is
minimized.
•
Voice dialing may not work in some situations,
depending on the effectiveness of the cellular
phone’s recognition function. For details, see the
support site (page 17).
Tips
•
Speak in the same way as you did when you stored
the voice tag.
•
Store a voice tag while seated in the car, via this unit
with “BT PHONE” source selected.
SMS indicator
While connecting a cellular phone to this unit,
the SMS indicator informs you of any incoming
or unread SMS messages.
If you receive a new SMS message, the SMS
indicator flashes.
If there are any unread SMS messages, the SMS
indicator stays lit.
Note
Function of the SMS indicator may depend on the
cellular phone.
Music streaming
Listening to music from an audio
device
You can listen to music of an audio device on this
unit if the audio device supports A2DP
(Advanced Audio Distribution Profile) of
Bluetooth technology.
1
Turn down the volume on this unit.
2
Press
(SOURCE/OFF)
repeatedly until
“BT AUDIO” appears.
3
Operate the audio device to start
playback.
4
Adjust the volume on this unit.
Adjusting the volume level
The volume level is adjustable for any difference
between the unit and the Bluetooth audio device.
1
Start playback of the Bluetooth audio device at
a moderate volume.
2
Set your usual listening volume on the unit.
3
Press the select button.
4
Press the select button repeatedly until “BTA”
appears, and rotate the control dial to adjust
the input level (“+18dB” – “0dB” – “– 8dB”).
Operating an audio device with this
unit
You can perform the following operations on this
unit if the audio device supports AVRCP (Audio
Video Remote Control Profile) of Bluetooth
technology. (The operation differs depending on
the audio device.)
*1
Press repeatedly until the desired setting appears.
*2
Depending on the device, it may be necessary to
press twice.
Operations other than the above should be
performed on the audio device.
Notes
•
Depending on the audio device, its information, such
as title, track number/time, playback status, etc.,
may not be displayed on this unit. The information is
displayed during Bluetooth Audio playback only.
•
Even if the source is changed on this unit, playback
of the audio device does not stop.
Tip
You can connect a cellular phone that supports A2DP
(Advanced Audio Distribution Profile) as an audio
device and listen to music.
To
Press
Repeat play
(3)
(REP)*
1
Shuffle play
(4)
(SHUF)*
1
Skip albums
(1)
/
(2)
(ALBUM –/+)
[press once for each album]
Play
(6)
(PAUSE)*
2
on this unit.
Pause
(6)
(PAUSE)*
2
on this unit.
Skip tracks
SEEK –/+ (
.
/
>
) [press
once for each track]
Reverse/
Fast-forward
SEEK –/+ (
.
/
>
) [hold to
desired point]
Summary of Contents for MEX-BT2950
Page 66: ......
Page 67: ......
Page 68: ...Sony Corporation Printed in Thailand http www sony net ...