24
Using optional equipment
Auxiliary audio equipment
By connecting an optional portable audio device
to the AUX input jack (stereo mini jack) on the
unit and then simply selecting the source, you
can listen on your car speakers. The volume level
is adjustable for any difference between the unit
and the portable audio device. Follow the
procedure below:
Connecting the portable audio
device
1
Turn off the portable audio device.
2
Turn down the volume on the unit.
3
Connect to the unit.
*
Be sure to use a straight type plug.
Adjust the volume level
Be sure to adjust the volume for each connected
audio device before playback.
1
Turn down the volume on the unit.
2
Press
(SOURCE/OFF)
repeatedly until “AUX”
appears.
After that, “AUX FRONT IN” appears.
3
Start playback of the portable audio device at a
moderate volume.
4
Set your usual listening volume on the unit.
5
Adjust the input level (page 22).
Card remote commander RM-X114
The corresponding buttons on the card remote
commander control the same functions as those
on this unit.
The following buttons on the card remote
commander have also different buttons/functions
from the unit.
•
DSPL (display) button
To change display items.
•
SOURCE button
To turn on; change the source (Radio/CD/AUX/
Bluetooth audio/Bluetooth phone).
•
<
/
,
(SEEK –/+) buttons
To control Radio/CD/Bluetooth audio, the
same as
(SEEK)
–/+ on the unit.
•
SOUND button
The same as the select button on the unit.
Bluetooth phone
:
Press and hold for 2 seconds or more to redial
the last number.
Press to enter voice dialing mode/end or
receive a call.
•
OFF button
To turn off/stop the source/end a call.
•
LIST button
To select PTY in RDS.
•
M
/
m
(DISC
*
//–) buttons
To control CD, the same as
(1)
/
(2)
(ALBUM –/+) buttons on the unit.
•
ATT (attenuate) button
To attenuate the sound. To cancel, press again.
*
Not available for this unit.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless
(SOURCE/OFF)
on the unit is pressed, or a disc
is inserted to activate the unit first.
AUX
AUX
Connecting cord
*
(not supplied)
DISC –
ATT
OFF
DSPL
MODE
SOURCE
DISC +
VOL
+
–
SEEK+
SEEK–
PRESET –
SOUND
ENTE
R
MENU
LIST
MODE
LIST
ENTER
*
ATT
DSPL
MENU
*
SOURCE
<
/
,
(SEEK –/+ )
SOUND
OFF
VOL (+/ –)
m
/
M
(DISC
*
/
PRESET
+/ –)
