manualshive.com logo in svg

Sony MEX-BT2500, Service Manual

Share
Download
Sony MEX-BT2500 Service Manual Download Page 1

SERVICE MANUAL

BLUETOOTH AUDIO SYSTEM

SPECIFICATIONS

MEX

-

BT2500

US and foreign patents licensed from Dolby
Laboratories.

Model Name Using Similar Mechanism

CDX-GT315C

CD Mechanism Type

MG-101TA-188//Q

Optical Pick-up Name

DAX-25A

– Continued on next page –

9-887-553-01

2007B05-1
© 2007.02

Sony Corporation

eVehicle Division
Published by Sony Techno Create Corporation

US Model

Canadian Model

AEP Model

UK Model

E Model

Ver. 1.0  2007.02

The Bluetooth word mark and logos are owned 
by the Bluetooth SIG, Inc. and any use of such 
marks by Sony Corporation is under license. 
Other trademarks and trade names are those of 
their respective owners.

Microsoft, Windows Media, 
and the Windows logo are 
trademarks or registered 
trademarks of Microsoft 

Corporation in the United States and/or other 
countries.

CD Player section

Signal-to-noise ratio: 95 dB
Frequency response: 10 – 20,000 Hz
Wow and flutter: Below measurable limit

Tuner section

US and Canadian models: 

AEP and UK models: 

E model: 

FM

Tuning range: 87.5 – 107.9 MHz
Antenna (aerial) terminal:

External antenna (aerial) connector

Intermediate frequency: 10.7 MHz/450 kHz
Usable sensitivity: 9 dBf
Selectivity: 75 dB at 400 kHz
Signal-to-noise ratio: 67 dB (stereo), 69 dB (mono)
Harmonic distortion at 1 kHz: 0.5 % (stereo),

0.3 % (mono)

Separation: 35 dB at 1 kHz
Frequency response: 30 – 15,000 Hz

AM

Tuning range: 530 – 1,710 kHz
Antenna (aerial) terminal:

External antenna (aerial) connector

Intermediate frequency: 10.7 MHz/450 kHz
Sensitivity: 30 

µ

V

AUDIO POWER SPECIFICATIONS

POWER OUTPUT AND TOTAL HARMONIC 

(US model only)

DISTORTION
23 watts per channel minimum continuous 
average power into 4 ohms, 4 channels driven 
from 20 Hz to 20 kHz with no more than 5% total 
harmonic distortion.

CEA2006 Standard
Power Output: 17 Watts RMS 

×

 4 at 

4 Ohms < 1% THD+N 
SN Ratio: 82 dBA 
(reference: 1 Watt into 4 Ohms)

FM

Tuning range: 87.5 – 108.0 MHz
Antenna (aerial) terminal:

External antenna (aerial) connector

Intermediate frequency: 10.7 MHz/450 kHz
Usable sensitivity: 9 dBf
Selectivity: 75 dB at 400 kHz
Signal-to-noise ratio: 67 dB (stereo), 69 dB (mono)

Harmonic distortion at 1 kHz: 0.5 % (stereo),

0.3 % (mono)

Separation: 35 dB at 1 kHz
Frequency response: 30 – 15,000 Hz

MW/LW

Tuning range:

MW: 531 – 1,602 kHz
LW: 153 – 279 kHz

Antenna (aerial) terminal:

External antenna (aerial) connector

Intermediate frequency: 10.7 MHz/450 kHz
Sensitivity: MW: 30 

µ

V, LW: 40 

µ

V

FM

Tuning range:

87.5 – 108.0 MHz (at 50 kHz step)
87.5 – 107.9 MHz (at 200 kHz step)

FM tuning interval: 50 kHz/200 kHz switchable
Antenna (aerial) terminal:

External antenna (aerial) connector

Summary of Contents for MEX-BT2500

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands