20
By rotating the control
Rotate and release to:
– Skip tracks.
– Tune in stations automatically.
Rotate, hold, and release to:
– Fast-forward/reverse a track.
– Find a station manually.
By pushing in and rotating the control
Push in and rotate the control to:
– Receive preset stations.
– Change discs during MD (CD) playback*
1
.
Push in, then rotate and hold for a
moment to:
– Enter the GP*
3
skip mode. Within 2
seconds, push in and rotate again for
continuous skip.
During playback of a CD containing MP3
files
*
4
Push in and repeat rotating quickly to:
– Change discs one by one.
Push in, then rotate and hold for a
moment to:
– Enter the album skip mode. Within 2
seconds, push in and rotate again for
continuous skip.
*1
Only if the corresponding optional equipment is
connected.
*2
If your car has no ACC (accessory) position on the
ignition key switch, after turning off the ignition, be
sure to press and hold
(OFF)
until the display
disappears.
*3
Available only when an MD containing groups is
inserted in this unit and played.
*4
Available only when optional CD unit with the MP3
file control function is connected.
Changing the operative direction
The operative direction of controls is factory-set
as shown below.
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
Press
(SEL)
for 2 seconds while
pushing the VOL control.
Note
If you press
(SEL)
for 2 seconds while pushing the
VOL control, “NORM” or “REV” appears in the display.
– “NORM” is to use the rorary commander at the
factory-set position.
– “REV” is to use the rorary commander when it is
mounted on the right side of the steering column.
SEEK/AMS
control
PRESET/DISC
control
To increase
To decrease
