16
Changing the sound and
display settings
The following items can be set:
•Clock (page 8)
•D.Info (Dual Information) to display the
clock and the play mode at the same time
(on) or to display the information alternately
(off).
•Amber/Green to change the illumination
color to amber or green.
•Dimmer to change the brightness of the
display.
— Select “on” to dim the display.
•Contrast to adjust the contrast if the
indications in the display are not
recognizable because of the unit’s installed
position.
•Beep to turn on or off the beeps.
•RM (Rotary commander) to change the
operative direction of the controls of the
rotary commander.
— Select “norm” to use the rotary
commander as the factory-set position.
— Select “rev” when you mount the rotary
commander on the right side of the
steering column.
•M.dspl (Motion display) to turn the motion
display on or off.
•A.Scrl (Auto Scroll) (page 9, 17)
1
Press
(SHIFT)
.
2
Press
(3)
(SET UP) repeatedly until the
desired item appears.
Each time you press
(3)
(SET UP), the item
changes as follows:
Clock
n
D.Info
*
n
Amber/Green
n
Dimmer
n
Contrast
n
Beep
n
RM
n
M.dspl
n
A.Scrl
*
*
When no CD or MD is playing, this item will
not appear.
Note
The displayed item will differ depending on
the source.
3
Press
(5)
(
n
) to select the desired
setting (Example: on or off).
For the “Contrast” setting, pressing
(5)
(
n
) makes the contrast higher, and
pressing
(2)
(
N
) makes the contrast lower.
4
Press
(SHIFT)
.
After the mode setting is complete, the
display returns to normal playback mode.
Boosting the bass sound
— D-bass
You can enjoy a clear and powerful bass
sound. The D-bass function boosts the low
frequency signal with a sharper curve than
conventional bass boost.
You can hear the bass line more clearly even
while the vocal volume remains the same. You
can emphasize and adjust the bass sound
easily with the D-BASS control.
Adjusting the bass curve
Turn the D-BASS control to adjust the
bass level (1, 2 or 3).
“D-BASS” appears in the display.
To cancel, turn the control to OFF.
Note
If the bass sound becomes distorted, adjust the
D-BASS control or volume.
0dB
D-BASS 3
D-BASS 2
D-BASS 1
Frequency (Hz)
Level
