Sony MDS-JE480, Operating Instructions Manual, Page: 25 / 32

masterpage:Left
(3 column)
lename[C:\Documents and Settings\pc13\Desktop\MDS-JE480 PMRF\Revise
Model\J9060101_4238553151MDSJE480CEL\4238553151\GB05OPE-CEL.fm]
25
GB
model name1[MDS-JE480]
[4-238-553- 15 (1)]
Other Function s
Fade-in Recording gradually increases the
signal level at the start of recording. Fade-out
Recording gradually decreases the signal level
at the end of recording.
Fade-in Recording
During recording pause, press FADER on
the remote.
“ b ” flashes in the display and the deck
performs Fade-in Recording for five seconds
(factory setting) until the counter reaches
“0.0s.”
Fade-out Recording
During recording, press FADER on the
remote.
“ B ” flashes in the display and the deck
performs Fade-out Recording for five seconds
(factory setting) until the counter reaches
“0.0s,” then pauses.
Tip
Do the following procedure to specify the fade-in or
fade-out duration for recording.
1 While the deck is stopped or playing, or
paused, press MENU/NO.
2 Turn AMS (or press ./> repeatedly)
until “Setup?” appears, then press PUSH
ENTER or YES.
3 Turn AMS (or press ./> repeatedly)
to select the setting, then press PUSH
ENTER or YES.
4 Turn AMS (or press ./> repeatedly)
to select the duration, then press PUSH
ENTER or YES.
Both the Fade-in and Fade-out durations can be
set in 0.1 second steps.
5 Press MENU/NO.
Fading in and fading out
To change the
duration of Select
Fade-in Recording F.in
Fade-out Recording F.out
You can set the deck so that it turns off
automatically after a specified duration.
1
While the deck is stopped or playing,
press MENU/NO.
2
Turn AMS (or press ./>
repeatedly) until “Setup?” appears,
then press PUSH ENTER or YES.
3
Turn AMS (or press ./>
repeatedly) until “Sleep Off” appears in
the display, then press PUSH ENTER or
YES.
4
Turn AMS (or press ./>
repeatedly) to select the setting, then
press PUSH ENTER or YES.
1) The deck turns off automatically after 60
minutes.
5
Press MENU/NO.
Tip
You can check the remaining time.
Once you turn on Sleep Timer, the remaining time is
displayed when you select “Sleep” in Setup Menu.
Falling asleep to music
— Sleep Timer
To Select
Turn on Sleep Timer Sleep On 1)
Turn off Sleep Timer Sleep Off (factory setting)