background image

7

MDR-Z7

SECTION  3

EXPLODED  VIEWS

  1 

4-541-036-01  PAD (R), EAR (R-ch)

  2 

4-541-034-01  HOLDER, EAR PAD

 3 

3-080-204-31 SCREW, 

TAPPING, 

P2

 4 

3-080-205-21 SCREW, 

TAPPING, 

P2

 5 

4-541-023-01 SEAL, 

REAR

 6 

4-541-025-01 HOLDER, 

HANGER

 7 

4-541-076-01 CUSHION, 

AXIS

  8 

4-541-013-01  HANGER (R) (R-ch)

 9 

4-540-997-01 HOLDER, 

TWIST

 10 

4-540-998-01 STOPPER, 

SHAFT

  11 

4-541-006-01  ORNAMENTAL SCREW M1.7 (TAPPING)

  DR2 

X-2590-515-1  PLATE (R) ASSY, FRONT (SV) (Including Driver) 

(R-ch)

  HJ2 

X-2590-513-1  HOUSING (R) ASSY (SV) 

(Including Cable with jack) (R-ch)

  Ref. No. 

Part No. 

Description 

Remark

  Ref. No. 

Part No. 

Description 

Remark

Note:

•  -XX and -X mean standardized parts, so 

they may have some difference from the 
original one.

•  Items marked “

*

” are not stocked since 

they are seldom required for routine ser-
vice. Some delay should be anticipated 
when ordering these items.

•  The mechanical parts with no reference 

number in the exploded views are not sup-
plied.

•  Color Indication of Appearance Parts Ex-

ample:

  KNOB, BALANCE (WHITE) . . . (RED)
   

 

 

   

 

Parts Color  Cabinet’s Color

3-1.  HOUSING (R-ch)  SECTION

• Front view

 L-ch 

housing (L-ch), head band section

 R-ch 

10

11

11

9

7

8

6

7

6

7

4

4

4

4

5

2

4

3

4

1

4

4

4

4

HJ2

DR2

Summary of Contents for MDR-Z7











Reviews: