2
MDR-SA1000/SA3000/SA5000
Note:
Follow the disassembly procedure in the numerical order given.
DRIVER (Lch/Rch)
(For both left and right headphones, disassemble through the same procedure)
SECTION 1
DISASSEMBLY
1
ear pad
2
four screws
3
Remove five solders of the head
band cord and cord (with plug).
3
Remove two solders
of the cord (with plug).
3
Remove two solders
of the cord (with plug).
4
Rotate the driver (Lch/Rch) in
the arrow direction to remove.
5
front plate assy
cord (with plug)
cord (with plug)
cord (with plug)
head band cord
3
Remove two solders
of the head band cord.
– DRIVER (Lch) –
(SA1000/SA3000)
– DRIVER (Rch) –
(SA1000/SA3000)
– DRIVER (Lch) –
(SA5000)
– DRIVER (Rch) –
(SA5000)
head band cord
Connect a lead wire of the cord (with plug) (green) to the terminal
with a marking.
(The location of a marking may differ from the illustration.)
Connect a lead wire of the head band cord (red) to the terminal
with a marking.
(The location of a marking may differ from the illustration.)
Connect a lead wire of the head band cord (red) to the terminal
with a marking.
(The location of a marking may differ from the illustration.)
Connect a lead wire of the head band cord (green) to the terminal
with a marking.
(The location of a marking may differ from the illustration.)
Natural color lead wire
connecting locations
Natural color lead wire
connecting locations
Red color lead wire
connecting locations
Black color lead wire
connecting locations
Black color lead wire
connecting locations
