background image

2

WARNING

To prevent fire or shock hazard, do not
expose the unit to rain or moisture.

To avoid electrical shock, do not open the
cabinet. Refer servicing to qualified
personnel only.

This equipment complies with the essential
requirements of the Directive 1999/5/EC Radio
and Telecommunications Terminal Equipment
Directive.

This product is intended to be used in the
following countries.
CEK version: United Kingdom
CED version: Germany, Sweden, Denmark,

Finland, Norway, Belgium,
Switzerland, Austria, Netherlands,
France, Portugal

To check for version, please refer to the barcode
label located on the top of the box.

Welcome!

Thank you for purchasing the Sony
MDR-RF845RK/RF815RK Wireless Stereo
Headphone System.  Before operating the unit,
please read this manual thoroughly and retain it
for future reference.
Some features are:
• Wireless system that allows you to listen to a

program free from the restriction of a cord

• High fidelity sound reproduction
• A compact transmitter with an AC power

adaptor (supplied) enables simple charging of
the headphone battery. Just by placing the
headphones on the transmitter, headphone
battery can be charged.

• Comfortable Supra-aural headphones with self

adjusting head band

• Automatic ON/OFF function on headphones

to preserve battery power

Summary of Contents for MDR-RF815RK













Reviews: