Sony MD Walkman MZ-E25, Service Manual

Page: 13 / 30

– 13 –
• MO AUTO Adjustment
No. Mode Description
1 061 Sled IN
2 071 Focus search
3 062 Sled OUT
4 031 MO EF balance
5
032
MO EF gain
6 031 MO EF balance
7 033 MO ABCD gain
8
034
MO focus gain
9 035 MO tracking gain
10 036 MO RF gain
11
037
MO ADIP gain
12 039 MO focus bias A
13 073 ADER check
14
061
Sled IN
15 071 Focus search
16 041 Low reflection CD EF balance
17
042
Low reflection CD EF gain
18 041 Low reflection CD EF balance
19 043 Low reflection CD ABCD gain
20
044
Low reflection CD focus gain
21 045 Low reflection CD tracking gain
22 046 Low reflection CD RF offset
23
047
Low reflection CD RF gain
* Remote controller LCD display during automatic adjustment.
4. If automatic adjustment result is OK, the display is as follows:
5. If automatic adjustment result is NG, the display is as follows:
* In case of NG, select the SERVO mode, and readjust NG item
automatically.
Adjustment in SERVO Mode
1. Select each adjusting mode following the configuration of
SERVO mode, and the lower 2 digits of mode number and the
adjusted value written to the EEPROM are displayed on the
LCD.
2. Press
P
key, and the display changes as shown below and au-
tomatic adjustment is executed.
Note
: Though the adjusted value can be changed to any value with VOL +
or
−
key, avoid frequent change.
3. Whem automatic adjustment is finished, the adjusted value
changes from blinking to lighting.
057
Mode No. being adjusted
Adjusted value (blinking)
074 End-OK
(blinking)
051
NG mode No.
Error code
NG
052
Mode No.
Adjusted value (lighting)
052
Adjusted value (blinking)
052
Adjusted value (blinking)