![background image](http://html.mh-extra.com/html/sony/mch-v11/mch-v11_operating-instructions-manual_1329890031.webp)
31
GB
Other Oper
ations
MHC-V11.4-582-493-21(1)
3
Start playing the music
and adjust the microphone
volume. Press MIC ECHO
repeatedly to adjust the echo
effect.
4
Start singing along with the
music.
Notes
•
Karaoke mode is turned on when the
microphone is connected.
•
If howling occurs:
— move the microphone away from the
system.
— change the direction of the
microphone.
— lower the microphone volume level.
— press VOL – to reduce the volume level
or press MIC ECHO repeatedly to adjust
the echo level.
•
Microphone sound will not be transferred
to the USB device during USB transfer.
Using Vocal Fader
You can reduce the sound of the vocal
in stereo source.
Press VOCAL FADER repeatedly
until “FADE ON” appears on the
display.
To cancel Vocal Fader effect, press
VOCAL FADER repeatedly until
“FADE OFF” appears on the display.
Note
To use the Vocal Fader in the CD or USB
function, turn on the Karaoke mode by
connecting the microphone.
Changing the key (Key Control)
Press KEY CONTROL
/
to suit
your vocal range in Karaoke
mode.
Enjoying music with the
Speaker Lights turned on
Press SPEAKER LIGHT.
The Speaker Lights are turned on.
To turn off the Speaker Lights
Press SPEAKER LIGHT again.
Note
If the illumination brightness is glaring,
switch on the room lights or turn off the
illumination.
Using an optional
equipment
1
Connect an optional
equipment to the AUDIO IN
L/R jacks on the unit using an
audio cord (not supplied).
2
Press FUNCTION repeatedly
until “AUDIO IN” appears on
the display.
3
Start playback on the
connected equipment.
4
Adjust the volume.
Adjust the volume of the
connected equipment first. If the
volume level is still too low, adjust
the volume level on the system
using VOL +/–.
Note
The system may enter standby mode
automatically if the volume level of the
connected equipment is too low. In this
case, increase the volume level of the
equipment. To turn off the automatic
standby function, see “Setting the automatic