Sony LMD1541W Operating Instructions Manual Download Page 38

Specifications

 

38

Output signal amplitude: 800 mVp-

p ±10%

Output impedance: 75 

Ω

 unbalanced

Audio monitor output connector

Stereo mini jack (1) 

Speaker (Built-in)

LMD-2341W/LMD-2041W: 1.0 W 

Monaural

LMD-1541W: 0.5 W Monaural

Headphones output connector

Stereo mini jack (1)

General

Power requirements

LMD-2341W: AC 100 V to 240 V, 

0.8 A to 0.4 A, 50/60 Hz
DC 24 V, 2.4 A

LMD-2041W: AC 100 V to 240 V, 

0.8 A to 0.4 A, 50/60 Hz
DC 12 V, 4.4 A

LMD-1541W: AC 100 V to 240 V, 

0.8 A to 0.4 A, 50/60 Hz
DC 12 V, 3.4 A

Power consumption

LMD-2341W: Maximum: approx. 

70 W

LMD-2041W: Maximum: approx. 

66 W

LMD-1541W: Maximum: approx. 

50 W

Inrush current

LMD-2341W:
(1) Maximum possible inrush current 

at initial switch-on (Voltage 
changes caused by manual 
switching): 
58 A peak, 0.3 A r.m.s. (240 V AC)

(2) Inrush current after a mains 

interruption of five seconds 
(Voltage changes caused at zero-
crossing): 
46 A peak, 0.2 A r.m.s. (240 V AC)

LMD-2041W:
(1) Maximum possible inrush current 

at initial switch-on (Voltage 
changes caused by manual 
switching): 
57 A peak, 0.3 A r.m.s. (240 V AC)

(2) Inrush current after a mains 

interruption of five seconds 
(Voltage changes caused at zero-
crossing): 
46 A peak, 0.2 A r.m.s. (240 V AC)

LMD-1541W:
(1) Maximum possible inrush current 

at initial switch-on (Voltage 
changes caused by manual 

switching): 
60 A peak, 0.3 A r.m.s. (240 V AC)

(2) Inrush current after a mains 

interruption of five seconds 
(Voltage changes caused at zero-
crossing): 
48 A peak, 0.2 A r.m.s. (240 V AC)

Operating conditions

Temperature

0 °C to 35 °C (32 °F to 95 °F)

Recommended temperature

20 °C to 30 °C (68 °F to 86 °F)

Humidity

30% to 85% (no condensation)

Pressure

700 hPa to 1060 hPa

Storage and transport conditions

Temperature

–20 °C to +60 °C (–4 °F to +140 °F)

Humidity

0% to 90%

Pressure

700 hPa to 1060 hPa

Supplied accessories

AC power cord (1)
AC plug holder (1)
Control panel cover (1) (For LMD-

2341W) 

Screws for control panel cover (3) (For 

LMD-2341W)

Operating Instructions (1) 
CD-ROM (1) 
Using the CD-ROM Manual (1)
Mounting bracket (2) (For LMD-

2041W)

Screws for mounting bracket (8) (For 

LMD-2041W)

Stand (2)
Screws for stand (6)

Optional accessories

Mounting bracket

MB-534 (For LMD-1541W) 

Monitor stand

SU-561
SU-562 (For LMD-1541W) 

Design and specifications are subject to change without 
notice.

Note
Always verify that the unit is operating properly before 
use. SONY WILL NOT BE LIABLE FOR 
DAMAGES OF ANY KIND INCLUDING, BUT 
NOT LIMITED TO, COMPENSATION OR 
REIMBURSEMENT ON ACCOUNT OF THE LOSS 
OF PRESENT OR PROSPECTIVE PROFITS DUE 
TO FAILURE OF THIS UNIT, EITHER DURING 
THE WARRANTY PERIOD OR AFTER 
EXPIRATION OF THE WARRANTY, OR FOR 
ANY OTHER REASON WHATSOEVER.

Summary of Contents for LMD1541W













































Reviews: