17
Location and Function of Parts and Controls
Front Panel
Power indicator
(On)/
(Standby) switch
Press the
side to turn the monitor on. Press the
side to switch the unit to standby state.
Input select buttons
PORT A/PORT B:
Each input connector can
be assigned for PORT A/B.
12G-SDI 1 is assigned for PORT A/B in the
default setting.
When you press
PORT A or
PORT B when
it is lit in green, a menu for selecting the input
connector assigned to the PORT A/B is
displayed.
When you press
PORT A or
PORT B when
it is lit in white, an image from the input
connector assigned to the PORT A/B is
displayed.
2 or 3 screen display setting buttons
PIP/POP:
For displaying the 2 or 3 screen
display or switching the 2 or 3 screen display
mode.
SWAP:
For swapping between the main
display and the sub display.
If the combination of input signals assigned to
each port is set to 12G-SDI 1 and 12G-SDI 2, or
HDMI and Display Port, the 2 or 3 screen display
is not available.
A.I.M.E. button
Press to select “Off,” “On,” or “Check Mode” for
the A.I.M.E. setting.
Also, you can adjust A.I.M.E. Structure, A.I.M.E.
Color, and A.I.M.E. Shadow.
Indicator
Operating State
Green
Power on
Flashes in Green
Power on with image displayed
(reduced backlight due to high
temperature)
Orange
Standby
Flashes in Orange
No image displayed (remote standby)
Summary of Contents for LMD-XH550MT
Page 43: ......
