Sony LMD-X2700N, Instructions For Use Manual

Page: 6 / 38

6
Guidance and manufacturer’s declaration – electromagnetic immunity
The LMD-X2705N/X2700N is intended for use in the electromagnetic environment specified below. The customer or
the user of the LMD-X2705N/X2700N should assure that it is used in such an environment.
Immunity test
IEC 60601
test level
Compliance level Electromagnetic environment – guidance
Portable and mobile RF communications equipment
should be used no closer to any part of the LMD-
X2705N/X2700N, including cables, than the
recommended separation distance calculated from the
equation appliance to the frequency of the transmitter.
Recommended separation distance
Conducted RF
IEC 61000-4-6
3 Vrms
150 kHz to 80 MHz
outside ISM bands
c
3 Vrms d = 1.2
√
P
6 Vrms
150 kHz to 80 MHz
in ISM bands
c
6 Vrms
Radiated RF
IEC 61000-4-3
3 V/m
80 MHz to 2.7 GHz
3 V/m IEC 60601-1-2: 2007
d = 1.2
√
P 80 MHz to 800 MHz
d = 2.3
√
P 800 MHz to 2.5 GHz
IEC 60601-1-2: 2014
d = 2.0
√
P 80 MHz to 2.7 GHz
Where P is the maximum output power rating of the
transmitter in watts (W) according to the transmitter
manufacturer and
d is the recommended separation
distance in meters (m).
Field strengths from fixed RF transmitters, as
determined by an electromagnetic site survey,
a
should
be less than the compliance level in each frequency
range.
b
Interference may occur in the vicinity of equipment
marked with following symbol:
NOTE 1: At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and
reflection from structures, objects and people.