Sony LMD-A170, Operating Instructions Manual

Page: 34 / 39

Specifications
34
XLR 4-pin (male) (1)
DC 12 V to 17 V (output impedance
0.05 Ω or less)
Output
SDI (3G/HD/SD) output connector
BNC type (2)
Output signal amplitude: 800 mVp-p
±10%
Output impedance: 75 Ω unbalanced
Composite output connector
BNC type (1)
Loop-through, with 75 Ω automatic
terminal function
Audio monitor output connector
Stereo mini jack (1)
Built-in speaker output
1.0 W Monaural
Headphones output connector
Stereo mini jack (1)
General
Power LMD-A240: AC 100 V to 240 V, 0.5 A
to 0.4 A, 50/60 Hz
DC 12 V to 17 V, 3.6 A to 2.6 A
LMD-A220: AC 100 V to 240 V, 0.5 A
to 0.4 A, 50/60 Hz
DC 12 V to 17 V, 3.4 A to 2.4 A
LMD-A170: AC 100 V to 240 V, 0.5 A
to 0.4 A, 50/60 Hz
DC 12 V to 17 V, 3.6 A to 2.5 A
Power consumption
LMD-A240:
Approx. 51 W (max.)
Approx. 45 W (average power
consumption in the default status)
LMD-A220:
Approx. 47 W (max.)
Approx. 43 W (average power
consumption in the default status)
LMD-A170:
Approx. 49 W (max.)
Approx. 42 W (average power
consumption in the default status)
Inrush current (1) Maximum possible inrush current
at initial switch-on (Voltage changes
caused by manual switching):
45 A peak, 5 A r.m.s. (240V AC)
(2) Inrush current after a mains
interruption of five seconds (Voltage
changes caused at zero-crossing):
15 A peak, 3 A r.m.s. (240V AC)
Operating conditions
Temperature
0 °C to 35 °C (32 °F to 95 °F)
Recommended temperature
20 °C to 30 °C (68 °F to 86 °F)
Humidity 30% to 85% (no condensation)
Pressure 700 hPa to 1060 hPa
Storage and transport conditions
Temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Humidity 0% to 90%
Pressure 700 hPa to 1060 hPa
Accessories supplied
AC power cord (1)
AC plug holder (1)
Handle (1) (LMD-A220/A170 only)
Fixing screws for the handle (4) (LMD-
A220/A170 only)
Before Using This Unit (1)
CD-ROM (1)
Optional accessories
Monitor stand
SU-561
Mounting bracket
MB-L22 (For LMD-A220)
MB-L17 (For LMD-A170)
Protection kit
BKM-PL17 (For LMD-A170)
Design and specifications are subject to change without
notice.
Notes
 Always verify that the unit is operating properly
before use. SONY WILL NOT BE LIABLE FOR
DAMAGES OF ANY KIND INCLUDING, BUT
NOT LIMITED TO, COMPENSATION OR
REIMBURSEMENT ON ACCOUNT OF THE
LOSS OF PRESENT OR PROSPECTIVE PROFITS
DUE TO FAILURE OF THIS UNIT, EITHER
DURING THE WARRANTY PERIOD OR AFTER
EXPIRATION OF THE WARRANTY, OR FOR
ANY OTHER REASON WHATSOEVER.
 SONY WILL NOT BE LIABLE FOR CLAIMS OF
ANY KIND MADE BY USERS OF THIS UNIT
OR MADE BY THIRD PARTIES.
 SONY WILL NOT BE LIABLE FOR THE
TERMINATION OR DISCONTINUATION OF
ANY SERVICES RELATED TO THIS UNIT
THAT MAY RESULT DUE TO
CIRCUMSTANCES OF ANY KIND.
SONY WILL NOT BE LIABLE FOR DAMAGES OF
ANY KIND RESULTING FROM A FAILURE TO
IMPLEMENT PROPER SECURITY MEASURES
ON TRANSMISSION DEVICES, UNAVOIDABLE
DATA LEAKS RESULTING FROM
TRANSMISSION SPECIFICATIONS, OR
SECURITY PROBLEMS OF ANY KIND.