T
une
r
11
GB
You can preset up to 20 FM stations and 10 AM
stations. You can then tune in any of those
stations simply by selecting the corresponding
preset number.
Automatic tuning preset
You can automatically tune in all of the stations
that can be received in your area and then store
the radio frequency of the desired stations.
1
Press TUNER/BAND repeatedly to
select “FM” or “AM”.
2
Press TUNING MODE repeatedly until
“AUTO” appears.
3
Press /–.
The frequency changes as the system scans
for a station. Scanning stops automatically
when a station is tuned in. At that time,
“TUNED” and “STEREO” (for an FM
stereo program) appear.
If “TUNED” does not appear and the
scanning does not stop
Set the frequency of the desired radio
station as described in steps 2 and 6 of
“Manual tuning preset”.
4
Press MEMORY.
5
Press /– repeatedly to select
the desired preset number.
6
Press TUNER ENTER.
“COMPLETE” appears.
7
Repeat steps 1 through 6 to store other
stations.
Manual tuning preset
You can manually tune in and store the radio
frequency of the desired stations.
1
Press TUNER/BAND repeatedly to
select “FM” or “AM”.
2
Press TUNING MODE repeatedly until
“MANUAL” appears.
3
Press /– repeatedly to tune in
the desired station.
4
Press MEMORY.
5
Press /– repeatedly to select
the desired preset number.
6
Press TUNER ENTER.
“COMPLETE” appears.
7
Repeat steps 1 through 6 to store other
stations.
Other Operations
Tuner
Presetting radio stations
Preset number
To
Do this
Tune in a station
with a weak signal
Follow the procedure described
in “Manual tuning preset”
(page 11).
Stop scanning
Press TUNING MODE.
Change the preset
number
Start over from step 1.
Change the preset
station
Start over from step 1.
Cancel presetting
Press MEMORY.
Preset number
continued
