27
Recording CDs by
specifying the track
order
— Programme Edit
You can record tracks from all the CDs in the
order you want. When programming, make
sure the playing times for each side do not
exceed the length of one side of the tape.
1
Place CDs and close the front cover.
2
Insert a blank tape into deck B.
3
Press FUNCTION repeatedly until
“CD” appears in the display.
4
Press PLAY MODE repeatedly until
“PROGRAM” appears in the
display.
5
Press DISC SKIP to select a CD.
6
Turn the jog dial until the desired
track appears in the display.
7
Press PLAY MODE once.
The track is programmed. “STEP” and
the programmed playing order appear,
followed by the total playing time.
8
Repeat steps 5 through 7 to
programme additional tracks to be
recorded on side A.
Skip step 5 to select tracks from the same
disc.
9
Press
P
to insert a pause at the end
of side A.
“P” appears in the display and the total
playing time resets to “0.00” in the
display.
Track number
Disc number
Total playing time
(including selected track)
DISC
PROGRAM
DOLBY NR
OFF
continued
Total playing time
The last programmed track
DISC
PROGRAM
DOLBY NR
OFF
3
12 2 1113
5
4,7
6
1
p
CHECK
9
p
EDIT
Summary of Contents for LBT-XB8AV
Page 51: ...51 ...