Sony LBT-D290 - Compact Hifi Stereo System Page 35 Operating Instructions Manual Download

Page: 35 / 44

To check the setting

Press the timer button you have set, DAILY
1 or DAILY 2.

“TIMER OFF” appears in the display.

Press DAILY 1 or DAILY 2 again.

To cancel the timer operation

Press the timer button you have set, DAILY
1 or DAILY 2.

“TIMER OFF” appears in the display.

Notes

• The system turns on 15 seconds before the preset

time.

• You cannot activate DAILY 1 and DAILY 2 at the

same time.

• You cannot set the timer if the timer on and off

times are the same.

• When you set the Sleep Timer, the Wake-up Timer

will not turn on the system until the Sleep Timer
turns it off.

• You cannot activate the Wake-up Timer and

Timer-recording at the same time.

Timer-recording radio
programs

To timer-record, you must preset the radio
station (see “Step 3: Presetting radio
stations”) and set the clock (see “Step 2:
Setting the time”) beforehand.

Tune in the preset radio station (see
“Listening to the radio”).

Press

/CLOCK SET.

“SET” appears and “DAILY 1” flashes in
the display.

Press /– to select REC,
then press ENTER/NEXT.

“ON” appears and the hour indication
flashes in the display.

LBT-D290/D590/G3300/XB3/XB3K/XB4/XB4K/XB30

LBT-D690/D990/XB600/XB6/XB6K

DISC

ALL

DOLBY NR

OFF

REC

DOLBY NR

OFF

REC

ALL DISC S

continued

3,4,5

REC

Summary of Contents for LBT-D290 - Compact Hifi Stereo System













































Search results

Summary of Contents for LBT-D290 - Compact Hifi Stereo System

Reviews:

Related manuals for LBT-D290 - Compact Hifi Stereo System

Brands by name

Popular brands

Sony LBT-D290 - Compact Hifi Stereo System, Operating Instructions Manual

Search results

Summary of Contents for LBT-D290 - Compact Hifi Stereo System

Reviews:

Related manuals for LBT-D290 - Compact Hifi Stereo System

Brands by name

Popular brands