–
20
–
KV
-XA34M60
RM-954
30
Additional Information
Troubleshooting
If you find any problem while viewing your TV, please check the following guide. If
any problem persists, contact your Sony dealer .
Possible cause
Symptom
Solutions
• Check the antenna cable and connection
on the TV, VCR and on the wall.
• Display the “CH PRESET” menu and
select “MANUAL PROGRAM” to preset
the channel again.
• Check the antenna type (“VHF”/“UHF”).
Contact a Sony dealer for advice.
• Adjust the antenna direction. Contact a
Sony dealer for advice.
• Try using a booster.
• Turn off or disconnect the booster if it is
in use.
• If the sound of all the channels are noisy,
display the “CH PRESET” menu and
check the TV system (“TV SYS”) setting,
then select “AUTO PROGRAM” to preset
the channels again.
• If the sound of some channels are noisy,
select the channel, then display the “CH
PRESET” menu and select the appropriate
TV system (“TV SYS”).
• Check the power cord, antenna and the
VCR connections.
• Press
?/1
(power).
• Press
!
(main power) on the TV to turn
off the TV for about five seconds, then
turn it on again.
• Connection is loose or
the cable is damaged.
• Channel presetting is
inappropriate or
incomplete.
• The antenna type is
inappropriate.
• The antenna direction
is inappropriate.
• Signal transmission is
low.
• Broadcast signals are
too strong.
• The TV system setting
or channel presetting
is inappropriate or
incomplete.
• The power cord,
antenna or VCR is not
connected.
• The TV is not turned
on.
Snowy picture
Noisy sound
Distorted picture
Noisy sound
Good picture
Noisy sound
No picture
No sound
Page
4
27
–
–
–
–
26
26
4
10
10
29
Additional Information
Additional Information
Self-diagnosis function
Your TV is equipped with a self-diagnosis function. If there is a
problem with your TV, the
1
indicator flashes red. The number of
times the
1
indicator flashes indicates the possible causes.
1
Check that the
1
indicator flashes red a number of times between
3-second intervals.
2
Count the number of times the
1
indicator flashes.
3
Press
!
(main power) to turn off your TV.
4
Inform your nearest Sony service center about the number of times the
1
indicator flashes.
Be sure to note the model name and serial number located on the rear of
your TV.
Front of TV
1
indicator
PROGR
MENU
AUTO
PROGR
ENTER
SELECT
L(MONO)
3
Additional Information
Summary of Contents for KV-XA34M60
Page 68: ... 86 KV XA34M60 RM 954 PRINTED WIRING BOARDS DVD SWITCH B1 DF DQP DRIVE D2 D2 Board B1 Board ...
Page 71: ... 91 KV XA34M60 RM 954 PRINTED WIRING BOARDS VELOCITY MODULATION VM1 VM1 Board CISPR F F Board ...
Page 72: ... 92 KV XA34M60 RM 954 J Board DVD 3D TERMINAL J MAGNETIC FIELD CORRECTION DH DH Board ...