KV
-XA25M50/XA25M80/XA29M50
RM-954
KV
-XA29M80/XA29M90/XA29N90
RM-954
RM-914
–
9
–
3
Using Y
our New TV
GB
Do not install the TV in an unstable position.
Use a proper TV stand.
Do not place any objects on the TV.
WARNING (continued)
Using Your New TV
4
Using Your New TV
Getting Started
Step 1
Connect the antenna
If you wish to connect a VCR, see the “Connecting a VCR” diagram below.
Connecting a VCR
To watch the video input, press
t
(see page 10).
: Signal flow
To video
and audio
outputs
IEC connector
(not supplied)
or
: Signal flow
Antenna cable (not supplied)
Antenna cable (not supplied)
Rear of TV
To
t
1, 2 or 3
(video input)
(yellow)
-L (MONO) (white)
-R (red)
Audio/Video cable (not supplied)
To S video
output
Rear of TV
VCR
To
8
(antenna)
To antenna
output
To
(S video input)
VIDEO
VIDEO IN
VIDEO OUT
AUDIO
R L
1
2
3
R
L
Y
C
B
C
R
Antenna cable (not supplied)
S video cable
(not supplied)
CAUTION
• Do not connect the power cord until you have completed making all other
connections; otherwise a minimum leakage current might flow through
the antenna and other terminals to ground.
• To avoid battery leakage and damage to the remote, remove the batteries
from the remote if you are not going to use it for several days. If any
liquid that leaks from the batteries touches you, immediately wash it
away with water.
