Sony KV-SW14M50, Service Manual

Page: 140 / 254

Sony KV-SW21M63 Group O2 (
GB,
CT)_2-636-173-12 (1)
19
x Changing the “Setup” setting
The “Setup” menu allows you to change the menu language, label the
connected equipment, select the color system, set the wake up timer beep and
reset your TV to factory settings.
1
Press WEGA GATE and select “Settings”.
2
Press V or v to select the “Setup” icon ( ), then press .
3
Press
V
or
v
to select the desired item (e.g., “Language”), then press .
Select To
“Language” change the menu language.
Press
V
or
v
to select either “English” or “ ” (Chinese), then
press .
“Video Label” label the connected equipment.
(1) Select “Video Input” and press
. Press V or v to select the
input you want to label, then press .
(2) Select “Label” and press , then press V or v to select
the label options: “Video 1”/“Video 2”/“DVD”, “VCR”,
“SAT”, “Game” or “Edit”*.
* You may edit the video label to your favorite name. Press V or
v to select alphanumeric characters for the label, then press .
“Color System” select the color system.
Press
V or v to select either “Auto”, “PAL”, “SECAM”,
“NTSC3.58” or “NTSC4.43”, then press . Normally, set this to
“Auto”.
“Wake Up Timer allow your TV to emit beeping sound when TV switches on
Beep” automatically using wake up timer.
Press
V
or
v
to select “On”, then press .
To cancel, select “Off”, then press .
“Factory Settings” reset your TV to factory settings.
Press
and press V or v to select “Yes”, then press .
To cancel, select “No”, then press .
Notes
• Color system is not selectable in FM Radio mode and “SECAM” is available for
KV-SW21M63/SW21M50/SW14M51 only.
• To ensure the beeping sound can be heard, you must set an appropriate volume level on your
TV and make sure the TV is not in mute condition.
• To stop the beeping sound, press any buttons on the remote control or top control panel.
• If no button is pressed for three minutes, the beeping sound will automatically go off.