Sony KV-AR252M61 Trinitron Service Manual Download Page 139

Page: 139 / 141

Additional Information

Sony KV-AR292M61 Group D4 (

GB,

TH)_4-101-005-11 (2)

Good morning!

Possible cause

Solutions

Page

Symptom

• The magnetic

disturbance from
external speakers or
other equipment, or
the direction of the
earth’s magnetic field
may affect the TV.

• The magnetic

disturbance from
external speakers or
other equipment, or the
direction of the earth’s
magnetic field may
affect the TV.

• The connection is loose

or the cable is
damaged.

• The antenna setup is

inappropriate.

• The channel carries no

Teletext broadcast.

• Connection is loose or

the cable is damaged.

• The antenna setup is

inappropriate.

• Signal transmission

is too low.

• Keep external speakers or other electrical

equipment away from the TV.

• Display the “Setup” menu and adjust

“Picture Rotation” so that the picture
position is optimal.

• Keep external speakers or other

equipment away from the TV. Do not
move the TV while the TV is turned on.
Press

(main power) on the TV to turn

off the TV for about 15 minutes, then turn
it on again to demagnetize the TV.

•Check the antenna cable and connection

on the TV, VCR and at the wall.

•Check the antenna setup. Contact a Sony

dealer for advice.

—

•Check the antenna cable and connectionon

the TV, VCR, and at the wall.

•Check the antenna setup. Contact a Sony

dealer for advice.

•Try using a booster.

• Use the fine tuning (“Fine”) function.

–

continue

Picture slant

Abnormal color
patches

TV cannot
receive stereo
broadcast sound.

Stereo broadcast

sound switches
on and off or is
distorted.

“100” appears at
the top of the
screen and there
is no Teletext
display.

Teletext display is
incomplete
(snowy picture
or double images)

01GB08ADV-SIDTHA.p65

08/10/03, 12:02 PM

Black

Summary of Contents for KV-AR252M61 Trinitron














































































































































Search results

Summary of Contents for KV-AR252M61 Trinitron

Reviews:

Related manuals for KV-AR252M61 Trinitron

Brands by name

Popular brands

Sony KV-AR252M61 Trinitron, Service Manual

Search results

Summary of Contents for KV-AR252M61 Trinitron

Reviews:

Related manuals for KV-AR252M61 Trinitron

Brands by name

Popular brands