Sony KV-32LS65AUS, Operation Manual

Page: 16 / 32

3.1 VSP9407 Features
• Integrated Video Matrix switch
– Up to 7 CVBS inputs and up to 2 Y/C inputs
– Up to three CVBS outputs (even Y/C input)
• Multi-Standard colour decoder with 4H COMB FILTER
– PAL/NTSC/SECAM -> Automatic recognition of chroma standard
– 2 Colour Decoder: Main C Picture in Picture
–
2D COMB FILTER in the Main Channel.
• Detection embedded circuits:
– Global motion and global still detection
– Film mode and phase detection (PAL, NTSC; 2-2, 3-2 pull down)
–Measurement of the noise level during the vertical retrace
(blanking) for both channels
–
Detection of letter box formats
• Noise reduction:
– Automatic measurement of the noise level
– Motion adaptive temporal noise reduction
– Intelligent Frame-based temporal noise reduction for luminance
and chrominance, depending on both noise measured and motion
detected pixel by pixel
– Separate motion detection and noise measurement in both Master
Channel (Main Picture) and Slave Channel (PIP)
• Scan-rate-conversion:
– Motion adaptive frame based 100/120Hz interlaced scan
conversion.
– Special treatment for film material (‘Inverse 3-2 pull down’)
– Large area flicker and line flicker reduction.
– Simple Interlaced Modes (100/120Hz):
a) ABAB, if still picture (avoiding line flicker)
b) AA’B’B, if moving picture (avoiding artefacts)
c) AAAA or BBBB, for Teletext (avoiding line flicker)
d) Sharpness improvement
– Digital colour transition improvement (DCTI)
– Digital luminance transition improvement (DLTI)
–
Adaptive horizontal and vertical PEAKING (luminance)
• Three D/A converters:
– 9 bit amplitude resolution for Y, -(R-Y), -(B-Y) output
Figure 3.2 shows the block diagram of VSP9407 while Figure 3.3
shows its pinning diagram.
14