Sony KV-32FV1 - 32" Fd Trinitron Wega, Service Manual

Page: 9 / 84

—
9
—
KV
-32FV1/34FVL1/36FV1
24
Using the SET UP menu
SET UP
CHANNEL SET UP
LANGUAGE: ENGLISH
FAVORITE CHANNEL
VIDEO LABEL
TILT CORRECTION: 0
MENU
Move Exit
MENU
Select
For detailed information on using the remote
control to modify menu settings, refer to
“Learning menu selection” on page 19.
To select the SET UP menu:
MENU
Display Highlight Select
Notes
• The FAVORITE CHANNEL feature is not
available for the AUX input.
• Your remote control can be programmed
to operate your cable box. (see page 28)
• After setting CABLE, you will need to run
AUTO PROGRAM.
• ON/OFF TIMER and CHANNEL BLOCK
settings will be erased when CHANNEL
FIX is set.
Using Your Menus (continued)
CHANNEL
SET UP
Basic set up
options for
viewing
With the CHANNEL SET UP menu open:
Press
V or v to access a feature, then press .
CABLE: Select ON if your TV is connected to a cable
system.
CHANNEL FIX: Press
V or v to set the TV's input to one
of the following options:
2-6: When a cable box is connected to the VHF/UHF
input. Press DBS/CABLE (FUNCTION) and then CH +/– to change channels
through your cable box.
AUX 2-6: When a cable box is connected to AUX and a cable or antenna is
connected to VHF/UHF. You can alternate between the two inputs by pressing
ANT on the remote control.
VIDEO 1: When you have connected video equipment (e.g. A/V receiver) and
you want the TV input fixed to it. You will be able to alternate between video
sources using the A/V receiver.
OFF: When you want to turn CHANNEL FIX off.
AUTO PROGRAM: Instructs the TV to program all receivable channels.
CHANNEL SKIP/ADD: With the CHANNEL SKIP/ADD
window open:
1 Select the desired channel.
2 Press
to SKIP or ADD (only one option will
be available).
CHANNEL CAPTION: Label up to 12 channels with their
call letters (up to four letters).
With the CHANNEL CAPTION menu open:
1 Press and then V or v to access the desired
channel, and press again.
2 Press V or v to display the first letter or number
of the caption and press to select it.
3 Press to activate. To erase a caption, press RESET.
CHANNEL SET UP
CABLE: ON
CHANNEL FIX: OFF
AUTO PROGRAM
CHANNEL SKIP/ADD
CHANNEL CAPTION
MENU
Move Exit
MENU
Select
Move Exit
MENU
Select
CHANNEL SKIP/ADD
MENU
SKIP
ADD
33
Use [0-9] or [CH +/-]
to select the channel
Move Exit MENU
Select
– – – –
CHANNEL CAPTION
MENU
CHANNEL
CAPTION 33
25
FAVORITE
CHANNEL
Quick access to
favorite channels
VIDEO LABEL
Label connected
equipment for easy
recognition
LANGUAGE
TILT CORRECTION
Setting FAVORITE CHANNEL:
1 Press
and then V or v to select AUTO or MANUAL. (Selecting AUTO will display the last
five channels chosen with the remote control's 0-9 buttons.)
2 Press V or v to move the cursor to 1, 2, 3, 4 or 5 and press .
3 Press V or v to access the desired channel and press .
To preview your favorite channels in the window picture, set PREVIEW to ON.
Using FAVORITE CHANNEL:
1 Press
when in normal viewing mode. Your FAVORITE CHANNEL options will appear.
2 Press V or v to access the channel you want to watch, and press .
If PREVIEW is ON, a window picture displays your favorite channels as you cycle through the options.
With the VIDEO LABEL window open:
1 Press
V or v to access the input mode you want to label and press .
2 Press V or v to choose the label and press .
VIDEO LABEL Options:
VIDEO 1/2/3: VHS, 8mm, BETA, LD, GAME, DBS, DVD, WEB, RECEIVER, DTV, SKIP
VIDEO 4: DVD, DTV, SKIP
When VIDEO LABEL is set to WEB, the picture will darken, creating an ideal picture for WebTV viewing.
If you select SKIP, your TV will skip this connection when you cycle through video sources using the TV/VIDEO button.
Select from available languages to display all menus in your language of choice.
Press V or v to correct any tilt of the picture b5 and –5 and press .
Move Exit MENU Select
FAVORITE CHANNEL
MENU
MODE : AUTO
3. 4
4. 3
2. 5
1. 6
5. 2
PREVIEW : ON
Exit
FAVORITES
125 ESPN
14 ABC
48 CBS
16 NBC
5 CBC
Move Exit
MENU
Select
VIDEO LABEL
MENU
VIDEO 1 : VHS
VIDEO 2 : GAME
VIDEO 4 : VIDEO 4
VIDEO 3 : VIDEO 3
26
Programming the remote
You can use the supplied remote control to
operate Sony or non-Sony video equipment.
Operating Video Equipment
1
Press CODE SET.
2
Press VTR/DVD (FUNCTION).
3
Use the 0-9 buttons to key in the
manufacturer's code number from the
following chart.
4
Press ENTER.
VCR code numbers
Manufacturer Code
Sony 301, 302, 303
Admiral (M. Ward) 327
Aiwa 338, 344
Audio Dynamic 314, 337
Broksonic 319, 317
Canon 309, 308
Citizen 332
Craig 302, 332
Criterion 315
Curtis Mathes 304, 338, 309
Daewoo 341, 312, 309
DBX 314, 336, 337
Dimensia 304
Emerson 319, 320, 316, 317, 318, 341
Fisher 330, 335
Funai 338
General Electric 329, 304, 309
Go Video 322, 339, 340
Goldstar 332
Hitachi 306, 304, 305,338
Instant Replay 309, 308
JC Penney 309, 305, 304, 330, 314, 336, 337
JVC 314, 336, 337, 345, 346, 347
Kenwood 314, 336, 332, 337
LXI (Sears) 332, 305, 330, 335, 338
Magnavox 308, 309, 310
Marantz 314, 336, 337
Marta 332
Memorex 309, 335
Minolta 305, 304
Mitsubishi/MGA 323, 324, 325, 326
Multitech 325, 338, 321
NEC 314, 336, 337
Olympic 309, 308
Optimus 327
Panasonic 308, 309, 306, 307
Pentax 305, 304
Philco 308, 309
Philips 308, 309, 310
Pioneer 308
Quasar 308, 309, 306
RCA/PROSCAN 304, 305, 308, 309, 311,
312, 313, 310, 329
Realistic 309, 330, 328, 335, 324, 338
Sansui 314
Samsung 322, 313, 321
Sanyo 330, 335
Scott 312, 313, 321, 335, 323, 324, 325, 326
Sharp 327, 328
Shintom 315
Signature 2000 (M. Ward) 338, 327
SV2000 338
Sylvania 308, 309, 338, 310
Symphonic 338
Tashiro 332
Tatung 314, 336, 337
Teac 314. 336, 338, 337
Technics 309, 308
Toshiba 312, 311
Wards 327, 328, 335, 331, 332
Yamaha 314, 330, 336, 337
Zenith 331
Operating a VCR
To turn on or off
To select a
channel directly
To change
channels
To record
To play
To stop
To fast forward
To rewind the tape
To pause
To scan
To change input
mode
Buttons on the
remote control
Press VTR/DVD (POWER).
Press the 0 – 9 buttons.
Press CH +/–.
Press ( and r
simultaneously.
Press ( .
Press p .
Press ) .
Press 0 .
Press P .
To resume normal playback,
press again or press
( .
Press ) or 0 during
playback.
To resume normal playback,
release the button.
Press TV/VTR.
23
Using the TIMER menu
TIMER
– – – – –:– – AM
CURRENT TIME SET
ON/OFF TIMER
DAYLIGHT SAVING: NO
MENU
Move Exit
MENU
Select
CHANNEL BLOCK
For detailed information on using the remote
control to modify menu settings, refer to
“Learning menu selection” on page 19.
To select the TIMER menu:
MENU
Display Highlight Select
To cancel the ON/OFF TIMER
function
Press RESET while the ON/OFF TIMER
menu is displayed.
Tip z
Set DAYLIGHT SAVING time before setting the clock.
DAYLIGHT
SAVING
Automatically adjusts
the time
CURRENT
TIME SET
Necessary for the
ON/OFF TIMER
ON/OFF TIMER
Wake up or
scheduled viewing
CHANNEL
BLOCK
Prevent access
to certain channels
Spring: Select YES to compensate for Daylight Saving Time.
The current time moves one hour ahead.
Fall: Select NO at the end of Daylight Saving Time.
The current time moves back one hour.
With the CURRENT TIME SET menu open:
1
Press .
2 Press V or v until the current day is displayed.
Press to select.
3 Press V or v until the current hour and AM/PM is
displayed. Press to select
4 Press V or v until the current minute is displayed, press .
The clock is set. Press MENU to exit.
Any loss of power will cause these settings to be erased.
With the ON/OFF TIMER menu open:
1
Choose the ON/OFF TIMER you would like to set and
press
.
2 Press V or v until the desired day or range of days is
displayed. Press to select
3 Indicate the time that you want the TV to turn on
(hour, then minutes) by pressing
V or v and then .
4 Set the time duration (maximum of 6 hours) by pressing V or v and then .
5 Press V or v until you reach the desired channel. Press to select.
The ON/OFF TIMER is now set. Press MENU to exit.
When you perform AUTO PROGRAM, all ON/OFF TIMER settings will be erased.
You will be able to block two channels for a period of up to 12 hours.
FOLLOW STEPS 1-5 OF ON/OFF TIMER ABOVE
To erase your CHANNEL BLOCK settings, press RESET
while in the CHANNEL BLOCK window. Performing AUTO
PROGRAM will erase your CHANNEL BLOCK settings.
Move Exit MENU Select
– – – – –:– – AM
CURRENT TIME SET
MENU
Move Exit
MENU
Select
– –:– – AM h CH
SUN 12:00 AM
ON/OFF TIMER
MENU
– – – – – –
– – – –
1.
– –:– – AM h CH
– – – – – –
– – – –
2.
Select a position
Move Exit MENU Select
– –:– – AM h CH
SUN 12:00 AM
CHANNEL BLOCK
MENU
– – – – – –
– – – –
1.
– –:– – AM h CH
– – – – – –
– – – –
2.
Select a position
–
–