background image

20

2

1

3

Remote Control Configuration for VCR/DVD

In it’s default condition this remote control will operate the basic functions of this Sony TV, Sony 
DVDs and most Sony VCRs. To control VCRs and DVDs of other manufacturers (and some Sony 
VCR models), please complete the following steps:

•Before you start, look up the 3 digit code for your brand of DVD or VCR from the list 

below. On those brands that have more than one code, enter the first code number.

•Sony will endeavour to update the software according to market changes. 

Therefore, please refer to the code table included with the remote control for 
the latest code set.

1

Press the Media Selector button on the remote control repeatedly until the 
required green light (VCR or DVD) is lit.

   If Media Selector is on TV position, code numbers will not be stored.

2

Before the green light goes out, press and hold the yellow button for 
approximately 6 seconds until the green light starts flashing.

3

Whilst the green light is flashing, enter all three digits of the code for your 
brand of VCR or DVD using the number buttons on the remote control. 

 If your selected code is entered correctly, all three green lights will be lit   

  momentarily.

4

Turn on your VCR or DVD and check that the main functions work.

• If your device is not working or some of the functions do not work 

please check that you entered the correct code set or try the next code 
listed against the brand. 

• Your brand codes may be lost if weak batteries are not replaced within 

a few minutes. To reset your brand of DVD or VCR please repeat the 
above steps. A small label is added inside the battery door to allow you 
to record your brand codes.

• Not all brands are covered and not all models of every brand may be covered.

VCR Brand List

DVD Brand List

Brand Code

Brand

Code

SONY (VHS)

301, 302, 303, 308, 309

SONY

001

SONY (BETA)

303, 307, 310

AIWA

021

SONY (DV)

304, 305, 306

DENON

018, 027, 020, 002

AIWA

325, 331, 351

GRUNDIG

009, 028, 023, 024, 016, 003

AKAI

326, 329, 330

HITACHI

025, 026, 015, 004

DAEWOO

342, 343

JVC

006, 017

GRUNDIG

358, 355, 360, 361, 320, 351

KENWOOD

008

HITACHI

327, 333, 334

LG

015, 014

JVC

314, 315, 322, 344, 352, 353, 

LOEWE

009, 028, 023, 024, 016, 003

354, 348, 349

MATSUI

013, 016

LG

332, 338

ONKYO

022

LOEWE

358, 355, 360, 361, 320, 351

PANASONIC

018, 027, 020, 002

MATSUI

356, 357

PHILIPS

009, 028, 023, 024, 016, 003

ORION

328

PIONEER

004

PANASONIC

321, 323

SAMSUNG

011, 014

PHILIPS

311, 312, 313, 316, 317, 318, 

SANYO

007

358, 359

SHARP

019, 027

SAMSUNG

339, 340, 341, 345

THOMSON

012

SANYO

335, 336

TOSHIBA

003

SHARP

324

YAMAHA

018, 027, 020, 002

THOMSON

319, 350

TOSHIBA

337

Additional Information

03GBKV32LS60U.fm  Page 20  Tuesday, May 14, 2002  10:48 AM

Summary of Contents for KV-28LS60U

























Reviews: