24
OK
.
.
Optional Equipment
Connecting equipment to the TV
Selecting the output source for the scart
socket
1. Press the MENU button on the remote control to display the
menu on the TV screen.
2. Press the
V
or
v
buttons to select the
symbol on the menu
screen then press the
b
button to enter the ‘VIDEO
CONNECTION’ menu screen.
3. Press the
V
or
v
buttons to highlight ‘TV Screen’ (input source
for the TV screen) or ‘Output’ (output source for
/
socket) then press the
b
button to confirm.
4. Press the
b
or
B
buttons to select the desired source (see below)
then press the OK button to confirm:
Note: When Auto is selected as the output source, then the signal
being viewed on the TV will also be output to AV2.
5. Press the MENU button to remove the menu from the TV screen.
Smartlink
Smartlink is a direct link between your TV set and VCR.
For Smartlink you need:
•
a VCR which supports Smartlink, NexTView Link or
Megalogic.
•
a fully-wired 21-pin scart cable to connect your VCR to scart
connector /
.
The features of Smartlink are:
•
tuning information such as the channel overview are
downloaded from the TV set to the VCR.
•
direct TV recording: While watching TV you need to press just
one button on the VCR to record this programme.
For more information on Smartlink please refer to your VCR
instruction manual.
TV Screen
TV, AV1, RGB, AV2, YC2, AV3, YC3
Output
TV, AV1, AV2, YC2, AV3, YC3, AUTO
G
2
s
2
2
s
2
PICTURE CONTROL
Contrast
Reset
FormatFormat
Picture Mode
Personal
. . . . . . . . .
Wide
PICTURE CONTROL
Contrast
Reset
FormatFormat
Picture Mode
Personal
. . . . . . . . .
Wide
TV
AV1
TV Screen
Output
[TV - - - - -]
[AV 1 - - - - -]
VIDEO CONNECTION
Summary of Contents for KV-28FS20U
Page 30: ...28 ...
