– 16 –
KV-21FQ10B/21FQ10E/21FQ10K/21CL10B
KV-21CL10E/21CL10K/21CL10U/21CL1K
RM-W100
SECTION 3
CIRCUIT ADJUSTMENTS
3-1. ADJUSTMENT WITH COMMANDER
Service adjustment to this model can be performed using the supplied remote commander RM-W100.
a. ENTERING SERVICE MODE
With the unit on standby, press the following sequence of buttons on the remote commander.
'TT – –' will appear in the upper right corner of the screen.
Other status information will also be displayed.
b. Press 'MENU' on the remote commander to obtain service menu on the screen.
GEOM
WHBL
SADJ
YC
SYNC
PICT
SW
VIF
c. The screen only displays 8 items at one time. To move to the corresponding item use the up
down
buttons on
the remote commander.
d. Press the right / left button or ENTER button on the remote commander to enter into the required item.
e. The screen only display 12 items at one time. To move to the corresponding item use the up
down
buttons on
the remote commander.
f.
Press right to increase or left to decrease the data.
g. Press the 'MENU' button on the remote commander to quit from Service Menu. Screen will still display 'TT – –'. To exit
from 'TT – –' menu, press 0 twice, 'TEST', 'TV' or switch the TV into standby mode.
Note:
•
After carrying out the service adjustments, to prevent the customer accessing the 'Service Menu' switch the TV set
OFF and then ON.
52
(0,63)
HPOS
Item
Name
Range
Data
40
(0,63)
HPAR
/
Display
/
Channel
5
/
Volume
[+]
/
Power
/ TV