Sony KPR-41EXR95, Service Manual

Page: 33 / 129

9
Press AN WINDOW to VTR
mode you have set on Remote Commander.
(When the MOP selector set to
select
Each lime you +/-.
and sequence.
2
OFF
OFF
To set direct play for other connected video equipment
Repeat steps 7 10.
To return to the previous menu
Press AN WINDOW until the cursor lo
3 MENU.”
Then press RETURN.
To return to the menu
Repeat until you reach the menu.
To return to the normal screen.
Press MENU.
1-16. TROUBLESHOOTING
Disturbances and sound can often be by checking symploms and following listed here.
If the problem still cannot be solved, your nearest facility.
Symptom
I
Possible causes and remedies
No (screen not lit). no sound
Make sure POWER on.
Check power cord connection.
Check and MOP controls are
. Make sure BOX selector to TV.
Poor or no (screen not lit). good sound
Adjust the VIDEO screen (pp. 42 45).
Check the connections.
color (pp. 24 25).
no sound
Press on N or VOL + on the Remote
Commander.
. Press MUTING on Remote Commander.
Check MTS selling (p.
Check the NNIOEO and MOP controls are
Make sure SPEAKER set correctly (p. 50).
No color color programs
. Check HUE and COLOR settings (pp. 42 43)
Snow and only
Check an active of correct channel.
Check cable selling.
Check connections.
Dolled lines or
IS
caused by local interference (for example, cars. neon
and Adjust for
Double or ghosts
from nearby or buildings cause
problem. Connecting a directional outdoor antenna or a
CAN cable may the
Remote control does not operate Check battery the Remote Commander.
No for
. Check NNIOEO button
IS
set
Check the connections are properly made.
Check power of connected turned on.
Check connected
IS
set correctly.
Try another channel. II could be station trouble.