97
Additional Information
• Press A/B until “Auto” appears on
the screen.
• Press
or
.
• Check the antenna cable and
connection on the projection TV, VCR
and on the wall.
• Adjust the antenna direction. Contact
a Sony dealer for advice.
• Press A/B until a better sound is
heard.
—
• Check the antenna cable and connection
on the projection TV, VCR, and at the wall.
• Adjust the antenna direction. Contact a
Sony dealer for advice.
• Try using a booster.
• Use the fine tuning (”Fine”) function.
• Use the fine tuning (”Fine”) function.
Possible cause
Symptom
Solutions
Page
33
26
7
–
32
34
7
–
–
88
88
• The stereo reception
setting is
inappropriate.
• The sound of the sub
picture is selected
when TWIN pictures
are displayed.
• The connection is
loose or the cable is
damaged.
• The antenna direction
needs adjustment.
• The broadcast signal
has a transmission
problem.
• The channel carries
no Teletext broadcast.
• Connection is loose
or the cable is
damaged.
• The antenna direction
is inappropriate.
• Signal transmission is
too low.
• There is interference
from external
sources, e.g., heavy
machineries, nearby
broadcast station.
Projection TV cannot
receive stereo
broadcast signal.
Stereo broadcast
sound switches on
and off or is
distorted.
or
The sound switches
between stereo and
monaural frequently.
“100” appears at the
top of the screen
after approximately
10 seconds and there
is no Teletext
display.
Teletext display is
incomplete (snowy
picture or double
images).
Lines moving across
the TV screen.
continued