– 51 –
KP-FS43M90/FS53M90
RM-998
RM-998
3. Operation Method for Fine Adjustment
(in GRN, BLU, or RED Mode)
1) Set in the Service mode, and select the category “PJE”.
2) Select item “FDIS” so that the data at each position can be
displayed in the fine adjustment mode, and set the data to
“01”.
3) Press “
9
” button on the commander, and the fine adjust-
ment mode will be active where a green marker appears in
the center of screen (in the case of GRN mode).
4) Push “
(ENTER)” button, and the marker color will be
switched between green (GRN mode) and white alternately.
5) Use “
1
” or “
4
” button on the commander, or the joystick
to move the marker to the position to be adjusted, where fine
adjustment can be made.
6) Press “
9
” button on the commander to return to the rough
adjustment mode.
Operating the joystick can move the marker
up, down, or to the left or right freely.
• When marker color is white.
(in this case, fine adjustment is disabled)
CROSSHATCH
Movement when joystick key
is moved up.
Movement when joystic key
is moved to the right.
CROSSHATCH
• Fine adjustment can be made on the basis of marker position
using joystick key.
• When marker color is green. (GRN mode)
1
: moves the marker clockwise from center to outside.
4
: moves the marker counterclockwise from outside to center.
joystick key
c
1
and
4
buttons
2. Operation Method for Rough Adjustment
1) Set in the Service mode, and select the category “PJE”.
2) Press “
1
” or “
4
” button on the commander to select the
item, and move “
” up, down, or to the left or right to
Commander Function (PJE mode)
Button
Mode
Description
+
-
WRITE
Writes data to NVM.
7
+
-
READ
Reads data from NVM.
5
+
-
*
PJE
Service data initialization. Not stored.
INITIAL
(Be sure not to use usually)
2
+
-
*
PJE
Copies and writes data of DRC1250
COPY
(50Hz) mode to all other modes.
+
-
*
PJE
Copies data of 50 Hz (PAL) mode to
WRT5060
60 Hz (NTSC) mode.
* : only data in the PJE mode.
change the data.
3) Select item “GRN CENT”. When BLU or RED is displayed,
press “
3
” button on the commander to change the adjust-
ment color in the order of GRN
c
BLU
c
RED.
4) In the GRN, BLU, or RED mode, move “
” up or down to
change the data in vertical direction, or move “
” to the
PJE
00
00
FDIS
|
Adjustment Item
Item No.
Data
GRN
000
000
CENT
Adjustment Item
Data (H)
Data (V)
Color
left or right to change the data in horizontal direction.
5) When it moves from PJE to other categories, repeat “
1
” or
“
4
” button and press it.
